Page 2 - TABLE OF CONTENTS
Page 4 - important Safety information; help you than the retailer where you made your purchase.
4 impOrTANT SAFETy iNFOrmATiON impOrTANT SAFETy iNFOrmATiON important Safety information • It is very important that you read the User Guide carefully as it contains detailed information you will need to get the most from your Oricom Baby Monitor. If you have any issues setting up or using your Oric...
Page 5 - become warm to the touch. This is normal and should not be a concern.; Battery safety; regulations, never in your household rubbish.; Warning
5 impOrTANT SAFETy iNFOrmATiON impOrTANT SAFETy iNFOrmATiON • The installation location plays an important role in ensuring proper operation. Therefore, maintain a distance of at least one meter from other electronic equipment, such as microwave ovens or hi−fi devices, otherwise they could cause int...
Page 6 - impOrTANT SAFETy iNFOrmATiON; may invalidate any approval or warranty.; Disposal; GETTiNG STArTED
6 impOrTANT SAFETy iNFOrmATiON • Use only the batteries supplied with the product. Improper use, or use of unapproved batteries may present a risk of fire, explosion, or other hazard, and may invalidate any approval or warranty. • If you believe the batteries are damaged, remove product from the cha...
Page 7 - Oricom Digital Baby Monitor call our Support
7 impOrTANT SAFETy iNFOrmATiON This User Guide provides you with all the information you need to get the most from your oricom Digital Baby Monitor. please read this guide carefully and keep it for future reference. Need help?If you need assistance setting up or using your Oricom Digital Baby Monito...
Page 8 - parent unit
8 OriCOm DiGiTAL BABy mONiTOr OriCOm DiGiTAL BABy mONiTOr parent unit You can loop a lanyard (not supplied) through here. Press to toggle the Parent unit receive volume between on and off. Press to talk to your baby. Steady green indicates that the Baby and Parent units are linked. Flashes green if ...
Page 9 - parent unit charger
9 OriCOm DiGiTAL BABy mONiTOr OriCOm DiGiTAL BABy mONiTOr parent unit charger front Back Charging light power socket Red when the Parent unit is correctly placed on the charger. For connection to the mains power socket via the power adaptor cable supplied.
Page 10 - Baby unit; OriCOm DiGiTAL BABy mONiTOr
10 H D S o u n d Baby unit Press to switch the Nightlight on or off. Press and hold to switch the power on or off. Steady green indicates that the Baby and Parent units are linked. Flashes green if not linked for the first 30 seconds. Flashes red if not linked for longer than 30 seconds. Also flashes...
Page 11 - Back of Baby unit
11 OriCOm DiGiTAL BABy mONiTOr OriCOm DiGiTAL BABy mONiTOr For connection to the mains power socket via the power adaptor cable supplied. power socket Back of Baby unit
Page 12 - and switch the power on.
12 SETTiNG up SETTiNG up parent unit 1. Plug one of the power adaptor cables into the socket marked on the back of the Parent unit charger and plug the other end into the mains power wall socket and switch the power on. 2. Activate the batteries by pulling the plastic tab away from the back of the P...
Page 13 - indicate that the batteries are being charged.
13 SETTiNG up SETTiNG up 3. Place the Parent unit into the charger. The red charging light will illuminate on the charger and the battery icon will start scrolling on the Parent until display to indicate that the batteries are being charged. Leave the batteries to charge for 16 hours to reach maximu...
Page 14 - SETTiNG up
14 Battery performanceRechargeable batteries in the Parent unit will last up to 20 hours in normal use. Please note that new batteries do not reach full capacity until they have been in normal use for several days. The charge capacity of rechargeable batteries will reduce with time as they wear out,...
Page 15 - Switch on and link the parent and Baby units; iMporTAnT
15 Switch on and link the parent and Baby units 1. Press and hold the button on the Baby unit for 1 second. The nightlight will briefly illuminate and then the green Link indicator will flash. 2. Press and hold the button on the Parent unit until all the LEDs on the unit briefly illuminate. The green L...
Page 16 - uSiNG yOur DiGiTAL BABy mONiTOr; conditions the range is up to 300 metres outdoors and 50m indoors)
16 uSiNG yOur DiGiTAL BABy mONiTOr If the link is broken:• check that the mains power is plugged in and switched on at the Baby unit• check that both units are switched on• check that the batteries are charged in the Parent unit• check that the Parent and Baby units are within range of each other (i...
Page 17 - Switch the Baby unit on
17 uSiNG yOur DiGiTAL BABy mONiTOr Switching on/off Switch the Baby unit on 1. Press and hold the button for 1 second. The nightlight will briefly illuminate and then the green Link indicator will flash until it links with the Parent unit. Once linked the green Link indicator will remain on. Switch th...
Page 18 - Baby sound level lED indicators
18 Baby sound level lED indicators The seven LEDs across the top of the Parent unit light up to indicate the level of sound being received from the Baby unit. The LEDs light up progressively as the sound increases.lEDs 1-2 light up Green (or Amber if Mute Low is on, see page 18) when sounds of 57dB ...
Page 19 - Adjust the parent unit loudspeaker volume
19 Adjust the parent unit loudspeaker volume There are 5 volume levels and off (Mute). The default loudspeaker volume is Level 3. 1. Press or to select the required level. You will hear a difference in volume as you keep pressing the button(s). If you wish to switch the volume off, keep pressing unt...
Page 20 - Mute All feature – parent unit only; button located on the top of the unit. The; Crying alert; on the Mute All feature.; Mute low
20 Mute All feature – parent unit only The Mute All feature prevents any sound coming from the Parent unit loudspeaker. With Mute All on you can still monitor your baby using the Baby sound level LED indicators (page 18) and the Crying Alert (below). 1. To switch Mute All on, press the button locate...
Page 21 - Talk Back
21 When Mute Low is switched on, any sounds from the Baby unit to the Parent unit will be muted unless a sound is made above a set level. The set level are sounds that are louder than the first two green LEDs would register, as described in ‘Baby sound level LED indicators’ on page 18. If the or but...
Page 23 - list of tones; Tone; reset the units
23 uSiNG yOur DiGiTAL BABy mONiTOr list of tones Your Baby Monitor unit can produce various tones. They have the following meaning: Tone Meaning Single tone Confirmation tone e.g. setting saved. Double tone (fast) Error tone e.g. max volume reached when adjusting volume. Double tone (slow) User aler...
Page 24 - Within 3 seconds of the Baby unit being switched on, press the; TrOuBLESHOOTiNG
24 reset the parent unit 1. Within 3 seconds of the Parent unit being switched on, press and hold the button for at least 10 seconds. The display will show reset for 2 seconds during the reset and then you will hear a confirmation beep once the reset has been performed. reset the Baby unit 1. Within...
Page 25 - Troubleshooting; problems
25 TrOuBLESHOOTiNG uSiNG yOur DiGiTAL BABy mONiTOr Should you experience difficulties operating the SC310 please refer to the troubleshooting guide below. If you still experience difficulties please contact Oricom Customer Support on 1300 889 785 for assistance. Troubleshooting problems Solutions Li...
Page 28 - law if the damage occurs as a result of:
28 WArrANTy WArrANTy During the Warranty Period, Oricom will where possible repair and if not replace the faulty product or part thereof. All component parts removed under this Warranty become the property of Oricom. In the unlikely event that your Oricom product has a re curring failure, Oricom may...
Page 29 - other than Oricom or Oricom's authorised service provider.
29 WArrANTy WArrANTy 4 modification to the product or services carried out on the production by anyone other than Oricom or Oricom's authorised service provider. Oricom will not be liable for any damages caused by the product or the failure of the product to perform, including any lost profits or sa...
Page 31 - Australia; Customer Support
Australia Oricom International Pty LtdLocked Bag 658South Windsor, NSW 2756 AustraliaEmail: [email protected]: 1300 889 785(Monday to Friday 8am to 6pm AEST)Web: www.oricom.com.auFax: (02) 4574 8898 Customer Support If you have any problems setting up or using this product you will find use...
