Omron G7, F7, L7, E7 - Manual
Omron G7, F7, L7, E7 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Type designation
- Page 5 – Pulse plus direction input mode,
- Page 6 – CPU unit component descriptions; • RS-232C and peripheral port settings; Operating mode at startup; PLC status indicators; The following indicators show the operating status of the PLC.; Operation; Effective port settings; ON; Indicator
- Page 8 – G7 + PLC in a water treatment application example
- Page 9 – Encoder
- Page 10 – L7 + PLC in lift application example
- Page 11 – Ordering information; Varispeed
- Page 12 – Digital I/O terminals; ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
365
G7/F7/L7/E7 inverter PLC
3G3RV-P10ST
@
-E
G7/F7/L7/E7 inverter PLC
The OMRON PLC technology embedded in
the OMRON Yaskawa inverter family
• OMRON PLC programmability in the
OMRON Yaskawa inverters.
• Flexibility and intelligence in the OMRON Yaskawa
inverter family.
• Wireless installation and seamless access to the
inverter parameters and analogue/digital inputs and
outputs.
• OMRON Compobus/S fieldbus inside. Thus, able to
control up to 256I/O's.
• Easy to integrate in the automation world:
DeviceNet type available.
• Standard OMRON tools can be used for program-
ming and commissioning.
• Ideal for applications like:
• Pump sequencing, remote control, water
treatment,etc together with the HVAC inverter:
E7&E7 IP54.
• Lift as control sequence inside, using the lift
inverter: L7.
• Cranes, winding/rewinding, position control, oth-
ers combined with the powerful flux vector control
inverter: F7Z.
• General purpouse using the high technology of
G7 3-Level vector control.
System configuration
Varispeed + PLC
CompoBus/S communication path
Other serial devices
HMI interface
CX-One (CX-Drive)
(CX-Programmer)
Terminator
DeviceNet
16 of 32 slaves max.
RS-422
RS-232C
Y203-EN2-02-Katalog.book Seite 365 Mittwoch, 24. Mai 2006 2:22 14
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
366 3G3RV-P10ST @ -E PLC inverter Specifications by product General specifications Type designation Specifications Item 3G3RV-P10ST8-E 3G3RV-P10ST8-DRT-E PLC core CPM2C-S CPM2C-S Inputs 6 24 VDC inputs 6 24 VDC inputs Outputs 4 sourcing/PNP transistor outputs 4 sourcing/PNP transistor outputs Periph...
G7/F7/L7/E7 inverter PLC 369 The minimum pulse widths for inputs IN00000 (A-phase input) and IN00001 (B-phase input) are as follows: The minimum pulse width for input IN00002 (Z-phase input) is as follows: Interrupt inputs 3G3RV-P10ST is equipped with inputs that can be used as interrupt inputs (int...
370 3G3RV-P10ST @ -E CPU unit component descriptions 1. DIP switch • RS-232C and peripheral port settings • Operating mode at startup Pin 2 determines the operating mode at startup only if there isn't a programming device connected to the peripheral port. 2. Input indicators (yellow) The input indic...
