Nutone 8510 - Manual
Nutone 8510 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Architectural & Engineering Specifications
March 2004
Ceiling or Inside Wall
Exhaust Fan
MODEL: 8510
DESCRIPTION
•
Ventilates large kitchens up to 150 sq. ft. or other rooms
up to 375 sq. ft.
•
Discharges through a 3
1
⁄
4
" x 10" duct.
•
Installs in ceilings or fits 2" x 4" walls; welded-on tabs fit
16" O.C. ceiling joists or walls studs.
•
Housing with duct collar is 14
3
⁄
16
" x 16
3
⁄
16
" x 3
3
⁄
16
". Built-in
backdraft damper.
•
Motor with one piece aluminum blades screws in. Motor
‘floats’ on cushions for quiet operation.
•
Silver anodized aluminum grille resists rust and
corrosion.
•
Housing has plug-in electrical receptacle.
•
Three-point suspension brackets for easy mounting
of plug-in fan motor assembly.
•
Refer to NuTone's catalog for a complete line of
accessories to effectively adapt this Exhaust Fan
to your construction requirements.
DESIGN FEATURES
Air Delivery:
300 CFM.
Sound Level:
7.5 Sones.
Dimensions:
Housing:
14
3
⁄
16
x 16
3
⁄
16
x 3
7
⁄
16
Material & Finish: Housing:
Galvanized steel.
Grille:
13
1
⁄
2
diameter metal, silver
anodized.
Motor:
Plug-in, thermally protected
Fan Blade:
One-piece, aluminum, 5-leaf,
Duct Size:
3
1
⁄
4
" x 10".
Electrical Rating:
120v, 60Hz, 2.0Amp
INSTALLATION
• The housing is installed in ceiling or 2" x 4" wall during
the rough-in stage of construction. Motor, Blade
Assembly and Grille are installed when other electrical
fixtures are installed.
• Knockouts in prewired outlet box permit connecting
house leads from above or the end of the housing. Motor
assembly has three (3) brackets that fasten into the ends
of three (3) mounting studs on the housing.
• Install at least 5 feet above floor or install above counter
or major appliance.
• Installation Instructions are included with each unit.
ARCHITECT'S SPECIFICATIONS
Exhaust Fan shall be Model 8510 as manufactured by
NuTone according to listed specifications. Fan shall
ventilate at 300 CFM at 0.10" S.P. at a sound level of
7.5 Sones. Housing shall be 14
3
⁄
16
" x 16
3
⁄
16
" x 3
7
⁄
16
" deep
and connect to 3
1
⁄
4
" X 10" duct.
8510
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
