Numark TTUSB - Manual
Numark TTUSB – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – RCA Audio Output Cables:; These cables should be plugged into
- Page 3 – If the turntable is powered down while in the 45 RPM
- Page 4 – Counter Weight and Scale Ring:; When transporting the turntable, it is always; Cartridge and Headshell:; PLATTER SETUP; Incorrect Platter setup can lead to poor turntable
- Page 6 – Setting the Anti-Skate Adjustment; In most cases, the Anti-Skate should be set to its minimum; IMPORTANT
- Page 7 – (ESPAÑOL) MANUAL DE COMIENZO RÁPIDO DEL LECTOR
- Page 15 – This Page is Intentionally Left Blank
USB Turntable
(TTUSB)
Quick Start Owner’s Manual
Manual de inicio rápido para el usuario
(ESPAÑOL)
Gebrauchsanweisung zur schnellen Inbetriebnahme
(DEUTSCH)
Guide d’utilisation rapide
(FRANÇAIS)
Manuale Rapido di Utilizzazione
(ITALIANO)
Box Contents
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 (ENGLISH) QUICK START GUIDE o Make sure all items listed on the front of this guide are included in the box. o READ SAFETY INSTRUCTION BOOKLET BEFORE USING THE PRODUCT o Go to http://www.numark.com for product registration. GENERAL CONTROLS 1. Power Cable: This power cable should be plugged into a...
3 IMPORTANT : There is a switch on the bottom panel, next to the RCA cables that selects between PHONO/LINE. Use PHONO level for plugging into a turntable input on a home stereo. Use the LINE level for plugging into CD/AUX/TAPE inputs. WARNING: You may damage your receiver if you plug in a LINE leve...
4 11. Counter Weight and Scale Ring: The Counterweight is used to balance the head shell and cartridge assembly so that the proper amount of stylus pressure is applied to the record. 12. Anti-Skate Adjustment: This knob is used to compensate for inward tracking forces. See TONEARM SETUP for more det...