Numark TT200 - Manual
Numark TT200 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – PLATTER SETUP; the front of the turntable.; PAGE 3
- Page 4 – CARTRIDGE SETUP; For Head Shell Mounted Cartridges:
- Page 5 – the locking collar counter clockwise.; INTERCHANGING TONEARM TUBES
- Page 6 – forth indicating that there is exactly 0 grams of stylus pressure.; TONE ARM SETUP
- Page 7 – CONTROLS; General Controls
- Page 8 – CABLE SETUP; Tone Arm Parts
- Page 9 – Bottom Parts
- Page 10 – This turntable is shipped with two sets of special cables:
- Page 11 – SPECIFICATIONS / OPERATION
- Page 12 – TROUBLE SHOOTING
- Page 13 – Copyright Numark Industries, LLC 2003
OPERATING INSTRUCTIONS
CONTENTS
Setup & Installation
2
Platter Setup
3
Cartridge Setup
4
Interchanging Tonearm Tubes
5
Tone Arm Setup
6
Controls
7
Cable Setup
10
Specifications
11
Trouble Shooting
12
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PLATTER SETUP WARNING: Incorrect Platter setup can lead to poor turntable performance, platter instability, or permanent motor damage. 1. Start by inspecting the bottom of the aluminum platter to check that both locking pins have rubber fittings on them. 2. Next, rotate the top of the motor assembly...
CARTRIDGE SETUP For Head Shell Mounted Cartridges: The cartridge that comes with this turntable should be preinstalled on the head shell. If it isn't, please follow the below instructions for installing a cartridge onto the head shell. 1. Position the head shell and the cartridge so that the four co...
INTERCHANGING TONEARM TUBES (sold seperately) WARNING: An incomplete understanding of this procedure could lead to permanent damage to the headshell, your records, or the tonearm assembly. NOTICE: Interchanging tonearm tubes unnecessarily may shorten the life of the tonearm tubes and/or tonearm comp...
