Page 3 - Contents
3 . Contents Regulatory Information and Safety Precautions 5 EN 55 022 Statements 6 EN 300386 Statement 6 European Union and European Free Trade Association (EFTA) Notice 7 Denan Statement (Japan/Nippon only) 10 Safety Messages 10 Notices 11 Software license 15 New in this release 19 Features 19 800...
Page 5 - International Regulatory Statements of Conformity
5 . Regulatory Information and SafetyPrecautions Read the information in this section to learn about regulatory conformitiesand compliances. International Regulatory Statements of Conformity This is to certify that the Nortel 8300 Series chassis and componentsinstalled within the chassis were evalua...
Page 6 - CAUTION
6 Regulatory Information and Safety Precautions ICES Statement (Canada only) Canadian Department of Communications Radio InterferenceRegulations This digital apparatus (8300 Series chassis and installed components)does not exceed the Class A limits for radio-noise emissions fromdigital apparatus as ...
Page 7 - European Union and European Free Trade Association (EFTA) Notice; MIC notice for 8310, and 8306 chassis (Republic of Korea only)
MIC notice for 8310, and 8306 chassis (Republic of Korea only) 7 European Union and European Free Trade Association (EFTA) Notice All products labeled with the CE marking comply with R&TTE Directive(1999/5/EEC) which includes the Electromagnetic Compliance (EMC)Directive (2004/108/EC) and the Lo...
Page 8 - National Safety Statements of Compliance
8 Regulatory Information and Safety Precautions National Safety Statements of Compliance CE Marking Statement (Europe only) EN 60 950 Statement This is to certify that the Nortel 8300 Series chassis and componentsinstalled within the chassis are in compliance with the requirements of EN60 950 in acc...
Page 10 - Safety Messages
10 Regulatory Information and Safety Precautions Fax: 52 5 480 2199 Embarcar a: (8306 and 8310 Chassis) 8301AC:100 to 240 VAC 16A 47 to 60 Hz por fuente de poder 8301AC: 200 to 240 VAC 12 A 47 to 60 Hz por fuente de poderuna fuente, una fuente + configuraciones de una fuente redundante, dosfuentes o...
Page 11 - ESD
Safety Messages 11 Notices Notice paragraphs alert you about issues that require your attention.The following sections describe the types of notices. For a list of safetymessages used in this guide and their translations, see "Translations ofsafety messages". Attention Notice ATTENTION An at...
Page 15 - Software license; Nortel Networks Inc. software license agreement; Licensed Use of Software. Nortel Networks grants Customer a
15 . Software license This section contains the Nortel Networks software license. Nortel Networks Inc. software license agreement This Software License Agreement ("License Agreement") is betweenyou, the end-user ("Customer") and Nortel Networks Corporation andits subsidiaries and aff...
Page 16 - Warranty. Except as may be otherwise expressly agreed to in
16 Software license of this Agreement. Customer shall not a) use, copy, modify, transferor distribute the Software except as expressly authorized; b) reverseassemble, reverse compile, reverse engineer or otherwise translate theSoftware; c) create derivative works or modifications unless expresslyaut...
Page 19 - New in this release; Features; Dual input DC-DC switching power supply; Other changes; Document changes
19 . New in this release The following sections detail what’s new in Nortel Ethernet Routing Switch8300 Installation — Chassis Installation and Maintenance, NN46200-309for Release 4.1: • “Features” (page 19) • “Other changes” (page 19) Features See the following sections for information about featur...
Page 21 - Introduction; Prerequisites
21 . Introduction The Nortel Ethernet Routing Switch 8300 chassis provides the physicalframework for the Nortel Ethernet Routing Switch 8300 modules. This document provides the instructions for installing the Nortel EthernetRouting Switch 8300 chassis (8306 and 8310 chassis) in an equipmentrack. Thi...
Page 23 - Chassis installation fundamentals; Navigation; Ethernet Routing Switch 8310 chassis
23 . Chassis installation fundamentals This chapter describes fundamental information that you need for installingthe Ethernet Routing Switch 8300 chassis (8306 and 8310 chassis) . Each Ethernet Routing Switch 8300 chassis consists of a sheet metalenclosure and a backplane. The number of bays for fa...
Page 24 - Risk of equipment damage
24 Chassis installation fundamentals modules. Slots are numbered from the top down. You can install 8300Series I/O switch modules in slots 1 through 4 and slots 7 through 10.Slots 5 and 6 are reserved for the 8393SF/CPU or 8394SF/CPU modules. The Ethernet Routing Switch 8310 chassis has three bays f...
Page 25 - Ethernet Routing Switch 8306 chassis
Ethernet Routing Switch 8306 chassis 25 Figure 1Ethernet Routing Switch 8310 chassis and components Ethernet Routing Switch 8306 chassis The Ethernet Routing Switch 8306 chassis provides four slots forinstalling I/O modules and two slots for installing Ethernet Routing Switch8393SF/CPU or 8394SF/CPU...
Page 26 - Power supplies
26 Chassis installation fundamentals • Ethernet Routing Switch 8348TX-PWR module or • Ethernet Routing Switch 8348GTX-PWR module CAUTION Risk of equipment damage Do not install Ethernet Routing Switch 8300 modules andEthernet Routing Switch 8100 or 8600 modules within the samechassis. Ethernet Routi...
Page 27 - Fan trays; Site requirements; Space requirements
Site requirements 27 • 8005DC • 8005DI DC, The PoE feature requires the following components: • Ethernet Routing Switch 8306 or 8310 chassis with PoE backplane • Ethernet Routing Switch 8301AC or 8302AC power supply • Ethernet Routing Switch 8393SF/CPU or 8394SF/CPU module and a choice of either of ...
Page 28 - AC input electrical requirements; Environmental requirements; Hardware requirements; Shipment contents
28 Chassis installation fundamentals Use the following guidelines to plan front and rear access: • The maintenance aisle in front of the frame requires a clearance of76.2 centimeters (cm) (30 inches). • The wiring aisle at the back of the frame requires a clearance of 61 cm(24 inches). AC input elec...
Page 31 - Other equipment
Hardware requirements 31 Figure 4Items in the Ethernet Routing Switch 8306 chassis shipping container Other equipment In addition to the items that are included in the Ethernet Routing Switch8310 and 8306 chassis accessory package you must also supply otheritems. Before you install the hardware, ens...
Page 32 - Cables; Successful installation verification
32 Chassis installation fundamentals Cables Unless you specifically order them, the cables required for your networkconfiguration are not included in the chassis accessory package. If you donot have the proper cables, contact your network administrator. Mounting hardware for the 8310, 8306 chassis T...
Page 33 - Chassis installation procedures
33 . Ethernet Routing Switch 8310 and 8306chassis installation This section describes how to install the Ethernet Routing Switch 8310and 8306 chassis. CAUTION ESD To prevent damage from electrostatic discharge, always wearan antistatic wrist strap connected to an electrostatic discharge(ESD) jack wh...
Page 35 - Chassis installation time requirements; Reducing the chassis weight; Procedure steps; Step; Installing the chassis on a flat surface
Installing the chassis on a flat surface 35 • “Mounting the Ethernet Routing Switch 8310 and 8306 chassis in anequipment rack” (page 36) • “Installing the cable guides” (page 40) Chassis installation time requirements The following table lists procedures you must use to install the NortelEthernet Ro...
Page 36 - Procedure job aid: Chassis weight including components
36 Ethernet Routing Switch 8310 and 8306 chassis installation Prerequisites • Provide adequate space around the unit for access to cableconnectors. • Ensure that the surface can safely support the weight of the chassis,its components, and its attached cables. See “Chassis installation time requireme...
Page 40 - Installing the cable guides
40 Ethernet Routing Switch 8310 and 8306 chassis installation --End-- Procedure job aid: Maximum number of chassis installed in 7-foot rack The following table shows the maximum number of chassis that you caninstall in a 7-foot rack. Chassis Maximum number of chassis installed in 7-foot rack 8310 3 ...
Page 43 - Switch operations; Powering on DC power supplies
43 . Switch operations This chapter describes some of the procedures that you perform tooperate the Ethernet Routing Switch 8300 and provides troubleshootinginformation. Navigation • “Powering on DC power supplies” (page 43) • “Powering on AC power supplies” (page 44) • “Resetting the switch” (page ...
Page 44 - Powering on AC power supplies
44 Switch operations ATTENTION When you first install a chassis that contains two or threepower supplies, you must turn on two of the power supply unitssimultaneously. If you wait longer to turn on the second powersupply, one of the power supplies could shut down. To correct thiscondition, turn off ...
Page 45 - Resetting the switch
Resetting the switch 45 The number of supported Power over Ethernet (PoE) modules depends onthe power supply rating (110 volts [V]AC nominal or 220 VAC nominal),the power supply model, and the number of power supplies. For moreinformation, see Ethernet Routing Switch 8300 Planning — PowerConsiderati...
Page 46 - Action; Installing removable flash memory cards
46 Switch operations Procedure steps Action To warm-start the Ethernet Routing Switch 8300 Series (nodiagnostic tests are run), press the Reset button for less than 5seconds. To press the Reset button, insert a small pointed object (forexample, an unbent paper clip) into the Reset button hole. The f...
Page 47 - Removing removable flash memory cards
Removing removable flash memory cards 47 2 Insert the card into the card receptacle. 3 Gently push the card in until it fits snugly in place. --End-- Removing removable flash memory cards Remove a removable flash memory card from the Ethernet RoutingSwitch 8393SF/CPU or 8394SF/CPU module to stop usi...
Page 48 - Protecting memory card files
48 Switch operations Protecting memory card files Write-protect the memory card for backup purposes after you successfullyload the configuration file and save your configuration because Nortelships each memory card with the read-write protect switch in theunprotected position. Typically, you do not ...
Page 51 - Part Numbers
51 . Part Numbers This chapter provides a list of Nortel Ethernet Routing Switch 8300hardware and part numbers. The following table lists Ethernet Routing Switch 8300 hardware and partnumbers. Table 4Ethernet Routing Switch 8300 hardware part numbers Part number Item Additional details DS1402007-E5 ...
Page 55 - Technical specifications; Ethernet Routing Switch 8310 chassis specifications
55 . Technical specifications This chapter lists the physical, environmental, and electrical specificationsfor the Ethernet Routing Switch 8310 and 8306 chassis and the availablepower supplies. Navigation • “Ethernet Routing Switch 8310 chassis specifications” (page 55) • “Ethernet Routing Switch 83...
Page 56 - International regulatory requirements
56 Technical specifications Table 5Ethernet Routing Switch 8310 chassis physical specifications (cont’d.) Physical specifications Depth: 19.9 in. (50.5 cm) Weight (empty): 85 pounds (lb) (39 kilograms [kg]) Weight (fully loaded): 225 lb (102 kg) Cooling system: Fan trays: 2 per chassis Fans: 8 per f...
Page 57 - Ethernet Routing Switch 8306 chassis specifications
Ethernet Routing Switch 8306 chassis specifications 57 Table 7Ethernet Routing Switch 8310 international regulatory requirements (cont’d.) International regulatory requirements U.S.: FCC CFR47 Part 15, Subpart B, ClassA Canada: ICES-003, Issue-2, Class A Europe: EN 55022-1998 Class A; EN61000-3-2/A1...
Page 59 - Ethernet Routing Switch 8301 AC power supply specifications
Ethernet Routing Switch 8301 AC power supply specifications 59 Table 10Ethernet Routing Switch 8306 international regulatory requirements (cont’d.) International regulatory requirements Europe: EN 55022-1998 Class A; EN 61000-3-2/A14,EN 61000-3-3 (CE Marking) Australia/NewZealand: AS/NZS 3548:1995, ...
Page 60 - Ethernet Routing Switch 8302 AC power supply specifications
60 Technical specifications Table 11Ethernet Routing Switch 8301 AC power specifications (cont’d.) DC Output Power Ratings Max. output power(combined): 1140 W (1050 W + 90W fans) 1770 W (1680 W + 90W fans) Non-PoE: 3.3 VDC @ 150 A 3.3 VDC @ 150 A 12 VDC @ 65 A 12 VDC @ 65 A PoE: 50 VDC @ 18 A 50 VDC...
Page 61 - Ethernet Routing Switch 8005DC power supply specifications
Ethernet Routing Switch 8005DC power supply specifications 61 Table 12Ethernet Routing Switch 8302 AC power specifications (cont’d.) Heat dissipation (thermal/output): 1126 BTU/hr 1195 BTU/hr Hold-up time: 20 ms 20 ms DC Output Power Ratings Max. output power (combined): 850 W (760 W + 90 W fans) 14...
Page 62 - Ethernet Routing Switch 8005DI DC power supply specifications
62 Technical specifications The following table lists the DC output power specifications. Parameter Specifications Output power (maximum) 1462 W (1372 W + 90 W fans) Modules 3.3 V @ 150 A 12 V @ 72 A Fans 12 VDC @ 7.5 A/ 24 A peak Mean time before failure (MTBF) 108 803 hr(Bellcore TR–332 standard) ...
Page 63 - Translations of safety messages; Class A device caution statement; ACHTUNG; PRECAUCIÓN; CUIDADO
63 . Translations of safety messages Class A device caution statement CAUTION This device is a Class A product. Operation of this equipmentin a residential area is likely to cause harmful interference, inwhich case users are required to take appropriate measuresnecessary to correct the interference ...
Page 64 - ATTENZIONE; Electrostatic discharge caution statement
64 Translations of safety messages CAUTION ATTENZIONE Questo dispositivo è un prodotto di Classe A. Il funzionamentodi questo apparecchio in aree residenziali potrebbe causareinterferenze dannose, nel cui caso agli utenti verrà richiestodi adottare tutte le misure necessarie per porre rimedio allein...
Page 65 - ATTENZIONE ESD
Electrostatic discharge caution statement 65 CAUTION ATTENZIONE ESD Per evitare danni derivanti da scariche elettrostatiche, indossaresempre un polsino antistatico collegato a una presa di scaricoelettrostatico (ESD) durante la manutenzione del prodotto.Accertarsi che il polsino sia a contatto con l...
Page 68 - Installation — Chassis
Nortel Ethernet Routing Switch 8300 Installation — Chassis Copyright © 2008 Nortel NetworksAll Rights Reserved. Printed in Canada and the United States of AmericaRelease: 4.1 Publication: NN46200-309 Document status: Standard Document revision: 01.01 Document release date: 16 June 2008 To provide fe...
