Nortel 210667-A - Manual

Nortel 210667-A

Nortel 210667-A – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
Page: / 17

Table of Contents:

  • Page 7 – Introduction; Precautions; Before installing the access point (AP) verify the following:; Requirements; Use and test the radio network with a properly
  • Page 8 – Network Connection; Add additional access points as needed.
  • Page 9 – Mounting the AP; Choose an option based on environment:
  • Page 11 – Antenna Extension Cables; Length
  • Page 12 – Connecting the Power Adapter; To connect the power adapter:
  • Page 13 – LED Indicators
  • Page 14 – Specifications; Physical Characteristics:
  • Page 15 – Radio Characteristics:
Loading the manual

Par t No. 210667-A
December, 2000

4401 Great America Parkway
Santa Clara, CA 95054

210667-A

Installing the e-mobility
802.11b Wireless LAN
DSSS Access Point

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 7 - Introduction; Precautions; Before installing the access point (AP) verify the following:; Requirements; Use and test the radio network with a properly

7 Introduction The e-mobility 802.11b Wireless LAN DSSS Access Point (AP) provides a bridge between Ethernet wired LANs and e-mobility wireless networks. It provides transparent access between Ethernet wired networks and radio-equipped mobile units (MUs). MUs include all of Nortel Networks ™ e-mobil...

Page 8 - Network Connection; Add additional access points as needed.

8 Network Connection Locate connectors for Ethernet, antennas, and power on the back of the AP. Ethernet configurations vary according to the environment. 10BASE-T UTP Use a 10BASE-T connection for multiple access points or an access point attached to a wired UTP Ethernet hub or switch. Normal 10BAS...

Page 9 - Mounting the AP; Choose an option based on environment:

9 Mounting the AP The AP rests on a flat surface or attaches to any hard, flat, stable surface. Position the AP at any angle. Use the standard-mounting kit provided. Choose an option based on environment: • Resting flat The AP rests on the four rubber pads on its underside. Place the AP on a surface...

Other Nortel Models

All Nortel Other