Nortel 210667-A - Manuals - manualsarea.com

Page 7 - Introduction; Precautions; Before installing the access point (AP) verify the following:; Requirements; Use and test the radio network with a properly

7 Introduction The e-mobility 802.11b Wireless LAN DSSS Access Point (AP) provides a bridge between Ethernet wired LANs and e-mobility wireless networks. It provides transparent access between Ethernet wired networks and radio-equipped mobile units (MUs). MUs include all of Nortel Networks ™ e-mobil...

Page 8 - Network Connection; Add additional access points as needed.

8 Network Connection Locate connectors for Ethernet, antennas, and power on the back of the AP. Ethernet configurations vary according to the environment. 10BASE-T UTP Use a 10BASE-T connection for multiple access points or an access point attached to a wired UTP Ethernet hub or switch. Normal 10BAS...

Page 9 - Mounting the AP; Choose an option based on environment:

9 Mounting the AP The AP rests on a flat surface or attaches to any hard, flat, stable surface. Position the AP at any angle. Use the standard-mounting kit provided. Choose an option based on environment: • Resting flat The AP rests on the four rubber pads on its underside. Place the AP on a surface...

Page 11 - Antenna Extension Cables; Length

11 The standard antenna performs well in most office environments. Obtain additional or higher-performance antennas from Nortel Networks. Contact a Nortel Networks representative to order the following models: • Standard rubber antenna • Single high-performance antenna • Twin high-performance divers...

Page 12 - Connecting the Power Adapter; To connect the power adapter:

12 Connecting the Power Adapter The power adapter connects to the rear of the access point and to a power outlet. To connect the power adapter: 1 Verify that the power adapter matches the country-of-use requirements. 2 Plug power adapter cable into the socket on the back of the access point. 3 Plug ...

Page 13 - LED Indicators

13 LED Indicators The LED indicators provide a status display indicating transmission and error conditions. The indicators are: Power Flashing indicates AP initialization. Shows steady green during operation. Link Flashing indicates data transfers on wired connection. Activity Flickering indicates b...

Page 14 - Specifications; Physical Characteristics:

14 Specifications Physical Characteristics: Dimensions 1.25 inches H x 5.5 inches L x 7.75 inches W (3.18 cm H x 14.97 cm L x 19.69 cm W) Weight (w/power supply) 1 lbs. (0.454 kg) Operating Temperature -4 ºF to 131 ºF (-20 ºC to 55 ºC) Storage Temperature -40 ºF to 149 ºF (-40 ºC to 65 ºC) Humidity ...

Page 15 - Radio Characteristics:

15 Radio Characteristics: The frequency range used by the e-mobility 802.11b WLAN DSSS components is within 2.4 GHz to 2.5 GHz unlicensed ISM band. From one to eleven of the fourteen 22 GHz wide channels, country dependent. Frequency Allowed Channel Range Country 2.412 - 2.470 1 - 11 United States 2...