Napoleon M605RBCSS - Manual

5 www.napoleongrills.com Starter fluid can be used to light the charcoal, but it is not the preferred method. It can be messy and may leave a chemical taste on the food if not completely burned off prior to cooking. Once lit, never add additional starter fluid to the grill. Store the bottle at least...

6 www.napoleongrills.com Charcoal Grilling Chart Food Direct/Indirect Heat Cooking Time Helpful Suggestions Steak 1 in. thick Direct heat 6-8 min.– Medium When selecting meat for grilling, ask for marbled fat distribution. The fat acts as a natural tenderizer while cooking and keeps it moist and jui...

7 www.napoleongrills.com Cooking Instructions Initial Lighting : When lit for the first time, the grill emits a slight odor. This is a normal temporary condition caused by the “burn-in” of internal paints and lubricants used in the manufacturing process and does not occur again. Simply burn the gril...

8 www.napoleongrills.com After Use Safety WARNING! To protect yourself and your property from damage, carefully follow these safety precautions. • Close the grill lid and all vents to extinguish fire.• Always allow the grill to cool completely before handling.• Never leave coals and ashes in grill u...

9 www.napoleongrills.com It is recommended that the ashtray/drippan be emptied out after each use. WARNING! Ensure the grill is cool and all coals are completely extinguished prior to removing any part from your grill. WARNING! Always wear protective gloves and safety glasses when cleaning your gril...

10 www.napoleongrills.com Troubleshooting Problem Possible Causes Solution Low heat / Low flame. Improper preheating. Not enough airflow. Low charcoal. Improper charcoal tray location. Allow charcoal to burn until covered with a light grey ash. (usually 20-25min). Open Vents. Add more charcoal to th...

11 www.napoleongrills.com Charcoal Grilling In Review Lighting Your Grill • Before cooking for the first time, we recommend burning on high for 30 minutes with the base vents fully open. This will burn off any lubricants used in the manufacturing process. • Fully open the vent on the base each time ...

12 www.napoleongrills.com KEEP YOUR RECEIPT AS PROOF OF PURCHASE TO VALIDATE YOUR WARRANTY. Ordering Replacement Parts Warranty Information MODEL: DATE OF PURCHASE: SERIAL NUMBER: (Record information here for easy reference) Before contacting the Customer Care Department, check the NAC Website for m...

13 www.napoleongrills.com CAUTION! During unpacking and assembly we recommended you wear work gloves and safety glasses for your protection. Although we make every effort to make the assembly process as problem free and safe as possible, it is characteristic of fabricated steel parts that the edges ...

14 www.napoleongrills.com 1 X N430-0002 Magnet Installation Snap magnet into slot in front of bottom shelf. Caster/Bracket Installation Attach (4) casters using (4) 1/4-20 x 3/8” screws and (4) 1/4-20 lock nuts for each caster. Tighten securely. 16 x N570-0073 (1/4-20 X 3/8”) 16 x N450-0027 (1/4-20)...

16 www.napoleongrills.com 6 x N570-0073 (1/4-20 X 3/8”) 3/8”(10mm) Grill Head Installation Lift grill head and place on assembled cart, lining up holes in top of side cart panels with holes in bottom of base. Fasten from inside using (4)1/4-20 x 3/8” screws, two per side. Install rotisserie mount br...

17 www.napoleongrills.com Side Shelf Installation Insert (2) 1/4-20 x 5/8” screws through washers into the top holes in side of base, do not tighten all the way. Slide side shelf over screw heads. Align bottom holes in side shelf with bottom holes in base, place remaining washers between side shelf ...

18 www.napoleongrills.com Handle Installation Charcoal Tray Adjustment Insert handle through slot in side shelf as shown. Fit over shaft protruding from base. Align holes and secure with (1) 1/4-20 x 2” screw and (1) 1/4-20 locking nut. 1 x N570-0084 (1/4-20 X 2”) 1 x W450-0032 (1/4-20) 3/8”(10mm) 7...

19 www.napoleongrills.com 2 x N105-0011 Bushing Installation Insert bushing into either end of bottom shelf. 4 x N570-0073 (1/4-20 X 3/8”) 3/8”(10mm) 4 x N735-0003 (1/4-”) Door Handle Installation Install door handle onto front of door using (2) 1/4-20 x 3/8” screws and (2) 1/4” washers per door.

20 www.napoleongrills.com Cabinet Door Installation Insert pivot rod (crimped end down) through hole on inside top of door. Holding door in one hand, direct pivot rod into hole in underside of front panel. Once secure, let rod slide down and through hole in bottom of door and into bushing in bottom ...

24 www.napoleongrills.com Item Part # Description 605 1 N570-0015 lid pivot screw x 2 N385-0129 NAPOLEON logo x W450-0005 logo spring clips x N510-0010 black silicone lid bumper x 3 N570-0073 1/4-20 x 3/8” screw x 4 N010-0517 lid handle x 5 N685-0005 temperature gauge x 6 N500-0048BK1HT plate charco...

27 www.napoleongrills.com FAX TO: 705 727 4282 CONTACT NAME:______________________________________________________________________ SHIP TO :_____________________________________________________________________________ __________________________________________________________________________________...