Mitsubishi PAR-21MAA- User Manual

Page 2 - Safety Precautions; WARNING

– 2 – 1 Safety Precautions ● Precautions are classified as follows, according to the level of potential danger. Denotes a condition or operation which, if handled incorrectly, may lead to serious injury or death. Denotes a condition or operation which, if handled incorrectly, may lead to bodily inju...

Page 3 - Doing so may result in electric shock or equipment failure.; CAUTION; Use of sharp tips may lead to electric shock or equipment failure.

– 3 – Keep hazardous materials away from this equipment. Do not install this equipment in locations where there is risk of combustiblegas leakage. The presence of combustible gas may result in explosion orfire. Do not wash this equipment with water. Washing with water may result in electric shock or...

Page 4 - Parts Names; Display Section; ̊F ̊C

– 4 – 2 Parts Names Display Section For purposes of this explanation,all parts of the display are shownas lit. During actual operation, onlythe relevant items will be lit. ˚F˚C ˚F˚C ERROR CODE AFTER TIMER TIME SUN MON TUE WED THU FRI SAT ON OFF Hr AFTER FILTER FUNCTION ONLY1Hr. WEEKLY SIMPLE AUTO OF...

Page 5 - Operation Section

– 5 – Operation Section PAR-21MAA ON/OFF FILTER CHECK OPERATION CLEAR TEST TEMP. MENU BACK DAY MONITOR/SET CLOCK ON/OFF Set Temperature buttons Down Up Timer Menu button(Monitor/Set button) Mode button (Return button) Set Time buttons Back Ahead Timer On/Off button(Set Day button) Opening thedoor. O...

Page 6 - Screen Configuration; Function Selection of remote controller; Setting the Day of the Week and Time

– 6 – 3 Screen Configuration <Screen Types> ● Function Selection of remote controller: Set the functions and ranges available to the remotecontroller (timer functions, operating restrictions, etc.) ● Set Day/Time: Set the current day of the week or time. ● Standard Control Screens: View and se...

Page 7 - Using the Remote Controller

– 7 – Note: Your new entries at Steps 2 and 3 will be cancelled if you press the Mode (Return) button 2 before pressing the Filter button 4 . 5. Press the Mode (Return) button 2 to complete the setting procedure. This will return the display to the standard control screen, where 1 will now show the ...

Page 11 - Using the Weekly Timer

– 11 – (3) Using the Timer This section explains how to set and use the timer. You can use Function Selection of remote controller to select which of three types of timer to use: 1 Weekly timer, 2 Simple timer, or 3 Auto Off timer. For information about how to set the Function Selection of remote co...

Page 12 - Be sure that the “Timer Off” indication is no longer

– 12 – <Setting the Weekly Timer> 5. Press the appropriate Set Time button A as necessary to set the desired time (at 5 ). * As you hold the button down, the time first increments in minute intervals, then in ten- minute intervals, and then in one-hour intervals. 6. Press the ON/OFF button 1 t...

Page 13 - Using the Simple Timer; Be sure that the timer value is

– 13 – 2 Using the Simple Timer ■ You can set the simple timer in any of three ways. • Start time only: The air conditioner starts when the set time has elapsed. • Stop time only: The air conditioner stops when the set time has elapsed. • Start & stop times: The air conditioner starts and stops ...

Page 14 - ; Examples

– 14 – <Viewing the Current Simple Timer Settings> 1. Be sure that the simple timer indicator is visible on the screen (at 1 ). 2. Press the Timer Menu button B , so that the “Monitor” appears on the screen (at 5 ). • If the ON or OFF simple timer is running, the current timer value will appea...

Page 15 - Using the Auto Off Timer; seconds; seconds

– 15 – 3 Using the Auto Off Timer ■ This timer begins countdown when the air conditioner starts, and shuts the airconditioner off when the set time has elapsed. ■ Available settings run from 30 minutes to 4 hours, in 30-minute intervals. Note: *1. Weekly Timer/Simple Timer/Auto Off Timer cannot be u...

Page 16 - Hold down the Timer On/Off button; . The “Timer Off “ indication

– 16 – <To Turn Off the Auto Off Timer...> ● Hold down the Timer On/Off button 9 for 3 seconds , so that “Timer Off” appears (at 6 ) and the timer value (at 7 ) disappears. ● Alternatively, turn off the air conditioner itself. The timer value (at 7 ) will disappear from the screen. <To Turn...

Page 18 - May also be individually restricted.

– 18 – (5) Other Indications <Centrally Controlled> ON/OFF TEMP. ˚C ˚C ● Displayed when operation is controlled by central controller, etc.Restricted operations are shown below.• ON/OFF (including timer operation)• Operation mode• Set temperature Note: May also be individually restricted. <...

Page 20 - Function Selection; Function selection of remote controller

– 20 – 6 Function Selection Function selection of remote controller The setting of the following remote controller functions can be changed using the remote controller function selection mode. Change the setting when needed. Item 1 1. Change Language (“CHANGELANGUAGE”) 2. Function limit (“FUNCTIONSE...

Page 21 - Suction air temperature display setting (“ROOM TEMP DISP SELECT”)

– 21 – → [Function selection flowchart] [1] Stop the air conditioner to start remote controller function selection mode. → [2] Select from item 1. → [3] Select from item 2. → [4] Make the setting. (Details are specified in item 3) → [5] Setting completed. → [6] Change the display to the normal one. ...

Page 24 - Specifications

– 24 – 7 Specifications Item Details Dimensions 120 (H) × 130 (W) × 19 (D) mm Weight 0.2 kg Power Source 10 to 13V DC (Supplied from indoor unit) Power Consumption 0.3 W Ambient Usage Environment 0 ° to 40 ° C, 30% to 90% relative humidity Composition PS

Mitsubishi PAR-21MAA- User Manual

Table of Contents:

Summary

Other Mitsubishi Models