Mitsubishi P93DW- User Manual

Page 3 - RISK OF ELECTRIC SHOCK DO NOT OPEN.

The lightning flash with arrowhead symbol, within an equilateral triangle, isintended to alert the user to the presence of uninsulated "dangerous voltage"within the product's enclosure that may be of sufficient magnitude to constitute arisk of electric shock. The exclamation point within an ...

Page 5 - INSTRUCTIONS FOR MEDICAL USE

INSTRUCTIONS FOR MEDICAL USE <according to the Medical Safety/EMC standard IEC/EN 60601-1-2> MEDICAL ELECTRICAL EQUIPMENT needs special precautions regarding EMC and needsto be installed and put into service according to the EMC information provided in the AC-COMPANYING DOCUMENTS.Portable and ...

Page 9 - CONTENTS

1 1 1 1 1 1 CONTENTS ................................................................. 1 2 2 2 2 2 PRECAUTIONS ..................................................... 2 - 4 3 3 3 3 3 UNPACKING ................................................................ 5 4 4 4 4 4 FEATURES AND FUNCTIONS ............

Page 10 - PRECAUTIONS; INSTALLATION LOCATIONS; PROTECTIVE MEASURES

2 2 PRECAUTIONS MAINTAIN GOOD VENTILATIONVentilation slots and holes are provided on sides of thisunit.Place the unit on a hard and level surface and locate atleast 4" (10cm) from walls to ensure proper ventilation. UNSUITABLE LOCATIONSAvoid shaky places or hot-springs areas where hydrogensulfid...

Page 12 - TECHNICAL DESCRIPTION

4 SAFETY TECHNICAL CHECKS Periods: According to the recommendations of the manufacturer of medical device.Scope: a) Visual check Housing, cables, operator controls, readout device ( displays, LED etc.), labels,accessories, instruction manual. b) Function test Performance check acc. instruction manua...

Page 13 - UNPACKING; Open the top of the box.; Take the unit out of the box carefully.; Accessories

5 UNPACKING 3 1 1 1 1 1 Open the top of the box. 2 2 2 2 2 Remove the cushion above the unit. • Make sure to keep the unithorizontal. 3 3 3 3 3 Take the unit out of the box carefully. Take the unit out of the box by the following procedures. Make sure to check thecontents. 4 4 4 4 4 Unwrap the unit....

Page 14 - FEATURES AND FUNCTIONS; Front Panel; Function

6 4 FEATURES AND FUNCTIONS OPEN COPY FEED LOCK UP DOWN BRT/CONT BRT CONT LOCK B 3 Front Panel 11 • 20 Power switch Turns on/off the power. 1 3 Function Name Reference Page 2 Displays stand-by, functions and errormessages. Indicator (BRT/CONT/LOCK) Displays the settings of brightness,contrast and but...

Page 15 - Rear Panel; POTENTIAL EQUALIZATION; Name; Reference

7 AC LINE ON OFF USB DIP SW 1 2 3 4 DIP SW FUNCTION TABLE NO. 1 2 3 4 FUNCTION LOCK SW-ON ON SW-OFF OFF Rear Panel POTENTIAL EQUALIZATION TERMINAL This is used to equalize the potential of theequipment connected to this unit.For details refer to the installationinstruction of equipment to beconnecte...

Page 16 - INSTALLATION OF PAPER; Pull out the paper end.

8 5 INSTALLATION OF PAPER Moisture, fingerprints or dust on thepaper surface may cause a noise atprinting or deterioration in printquality. Set the paper by the follow-ing procedure to prevent adhesionof fingerprint or dust on the papersurface. Note: The printing surface is the outside. Place the pa...

Page 17 - CAUTION; Do not use defective paper.; INCORRECT; Adjust the paper position correctly.

9 • Keep the high-density paper away from fingerprint, dust or moisture when storing it.• Do not touch the rubber roller. Do not stain or damage the roller surface.• Do not touch the thermal head (located behind the cutter). When printing, the thermal head is heated to high temperature. • Do not tou...

Page 18 - EXAMPLE OF CONNECTION / SETTING OF SWITCHES; Connection; Installing printer driver; How to open the ReadMe file; DIP SW

10 6 EXAMPLE OF CONNECTION / SETTING OF SWITCHES Connecting to various equipment with USB interface such asmedical equipment and personal computer. Connection Connect the digital monochrome printer with PC or medicalequipment through a USB cable. Setting of Switches Personal computer ormedical equip...

Page 19 - PRINTING; Cut the printed paper.; Copy Printing; Cancel of Copy Printing

11 7 PRINTING Print a picture with an applicationsoftware. The image data is transferredthrough USB interface. FEED COPY cutter 2 You can set the number of copies by pressingthe COPY button on the front panel. (Settingrange : 1 to 200)You can copy the same picture as many timesas you desire until a ...

Page 21 - ADJUSTMENT OF PRINT PICTURE; Adjustment of Printer Brightness/Printer Contrast

13 8 ADJUSTMENT OF PRINT PICTURE Adjustment of Printer Brightness/Printer Contrast You can make fine adjustment of printer brightness andprinter contrast of the printed picture. Control panel • For adjustment, use the BRT/CONT button " BRT/CONT ", UP button " UP " and DOWN button ...

Page 23 - To lock the button functions

15 Resetting the values You can reset the values of printer brightness and printercontrast. 1 Turn off the power. 2 While pressing the FEED button, turn on the power. 3 The display by the indicator changes from to , and the values are reset to the default setting. Automatic restoration to the standb...

Page 24 - Overheat; ERROR DISPLAY; COPY button; FEED button

16 9 In case of an error in the unit during operation, you are warnedby an alarm tone or the LED indicator. Cause/Error display 1 1 1 1 1 Overheat ERROR DISPLAY Symptom/Remedy [Symptom]• When the head gets overheated, the indicator blinks. When overheat occurs while more than one copy is being proc-...

Page 25 - No paper; Button input

17 Cause/Error display Cause/Error display 2 2 2 2 2 No paper [Symptom]• When the paper runs out or the paper is not installed, printing becomes impossible and an alarm tone is heard.In this case, all the buttons become invalid. • If this error occurs while more than one copy is being printed or the...

Page 27 - STATUS AND MODES; LED display

19 10 STATUS AND MODES Set state/Mode LED display Contents of LED display Power off Stand-by Print state Printer brightness mode Printer contrast mode Error detect state Power off During data receiving During data receiving Fine adjustment of the picture brightness No paper Button input error Door i...

Page 28 - Insert the cleaning paper.; USE OF CLEANING PAPER

20 11 When the thermal head is dirty with dust, etc., white spots or stripes may appear on theprint. In this case, clean the thermal head by the following procedure BY USING THESUPPLIED CLEANING PAPER. Roll the cleaning paper and installinto the set. Switch the left side lever to the OPENposition.Th...

Page 29 - MAINTENANCE; Turn off the power for maintenance.

21 12 MAINTENANCE Turn off the power for maintenance. Maintenance of Main Unit Wipe off stains of the front panel with a soft cloth.When the panel is heavily stained, wipe with a cloth moistenedwith neutral cleanser diluted by water and finish with a drycloth. Maintenance of Rubber Roller When the r...

Page 30 - SPECIFICATIONS; Operating conditions:; SERVICE INFORMATION

22 13 SPECIFICATIONS Type: Digital Monochrome Printer Model: P93DW/P93DE Power supply andpower consumption: 100-240V AC, 50/60Hz, 1.5 - 0.8A Connection terminal: USB interface (Series "B" receptacle)Hi-Speed USB (Ver. 2.0) supported Resolution: 1280 x 1280 pixels (Standard)(Max. 1280 x 5760 ...

Mitsubishi P93DW- User Manual

Table of Contents:

Summary

Other Mitsubishi Models