Milwaukee 9566 V.2- User Manual

Milwaukee 9566 V.2

Milwaukee 9566 V.2– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
Page: / 32

Table of Contents:

  • Page 2 – SAFETY PRECAUTIONS
  • Page 3 – TABLE OF CONTENTS; HOIST SPECIFICATIONS
  • Page 4 – APPLICATION INFORMATION; ADVERSE ENVIRONMENTAL CONDITIONS; SAFETY INFORMATION
  • Page 5 – Installation of Standard Chain; OPERATION
  • Page 6 – OVERLOAD LIMITING PROTECTION; MAINTENANCE; INSPECTIONS
  • Page 7 – CHAIN
  • Page 8 – LIMIT SWITCH ADJUSTMENT; IMPORTANT; BRAKE
  • Page 9 – DO NOT move; LUBRICATION
  • Page 11 – POWER CORD PRECAUTIONS WITH 1-PHASE HOISTS; power cables
  • Page 13 – TROUBLE SHOOTING
  • Page 15 – INSPECTOR’S REPORT; RECOMMENDED LUBRICATION SCHEDULE*; ELECTRIC POWERED CHAIN HOIST
  • Page 16 – Figure 12 - Basic Hoist
  • Page 17 – Description
  • Page 20 – Figure 16 - Electrical Parts; Ref Description
  • Page 21 – Figure 17 - Limit Switch Parts
  • Page 22 – Figure 18 - Pushbutton Station
  • Page 24 – Figure 19 - Transmission Parts
  • Page 26 – Figure 20 - Chaining Parts
  • Page 28 – NOTES
  • Page 32 – WARRANTY; Every
Loading the manual

The use of any hoist presents some risk of personal injury

or property damage. That risk is greatly increased if proper

instructions and warnings are not followed. Before using this

hoist, each operator should become thoroughly familiar with

all warnings, instructions, and recommendations in this

manual. Retain this manual for future reference and use.

Forward this manual to the hoist operator.

Failure to operate the equipment as directed in the manual

may cause injury.
Before using the hoist, fill in the information below. Model and

serial numbers are stamped into the aluminum hoist housing.

Model Number

Serial Number

Purchase Date

F

ollow all instructions and warnings for

inspecting, maintaining and operating this hoist.

ELECTRIC CHAIN HOIST

The equipment described and illustrated in these

instructions is intended for industrial use only and

should not be used to lift, support or otherwise

transport people.

Catalog No.

Rated Load

9560

1/2 Ton

9561
9562

9565

1 Ton

9566
9567
9568

9570

2 Ton

9571
9572
9573

OPERATOR’S

MANUAL

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - SAFETY PRECAUTIONS

2 Milwaukee Electric Tool Corporation 13135 West Lisbon Road Brookfield, Wisconsin 53005 TEL: (800) 729-3878 SAFETY PRECAUTIONS Each MILWAUKEE Electric Chain Hoist is built in accordance with the specifications contained herein and at the time of manufacture complies with our interpretation of appli...

Page 3 - TABLE OF CONTENTS; HOIST SPECIFICATIONS

3 MILWAUKEE Electric Chain Hoists are rugged, portable hoists that provide quick, precise lifting. The hoists are constructed of tough, but lightweight, die cast aluminum alloy housings. An oil bath transmission, equipped with heat-treated, alloy steel gears and an overload limiting clutch, provides...

Page 4 - APPLICATION INFORMATION; ADVERSE ENVIRONMENTAL CONDITIONS; SAFETY INFORMATION

APPLICATION INFORMATION This hoist is intended for general industrial use for lifting and transporting freely suspended material loads within its rated capacity. MILWAUKEE cannot be responsible for applications other than those for which MILWAUKEE equipment is recommended. Prior to installation and ...

Other Milwaukee Models