Milwaukee 7155-21- User Manual
Milwaukee 7155-21– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – TERMINOLOGY; Specifi cations; SPECIFIC SAFETY INSTRUCTIONS; MILWAUKEE; AIR SOURCE
- Page 5 – WARNING
- Page 6 – OPERATION; Selecting Actuation Mode; Clearing a Jammed Fastener; Removing Fastener Strips
- Page 7 – REQUIRED DAILY TESTING
- Page 8 – Quick Connectors
- Page 9 – Pour limiter les risques de blessures,
- Page 10 – ENTRETIEN; L’entretien de l’outil doit être ré-; PRISE D’AIR; Limiter la pression de l’air dirigée
- Page 11 – DESCRIPTION FONCTIONNELLE
- Page 13 – Installation des bandes d’attaches; AVERTISSEMENT; Retrait des bandes d’attaches
- Page 16 – catalogue des outils MILWAUKEE; Connecteurs rapides
- Page 17 – Para reducir el riesgo de lesiones, lea
- Page 18 – REPARACIÓN; La reparación de la herramienta la; FUENTE DE AIRE
- Page 19 – DESCRIPCIÓN FUNCIONAL
- Page 21 – Cómo instalar las tiras de sujetadores; Cómo quitar las tiras de sujetadores; ADVERTENCIA; Cómo desatascar un sujetador atorado
- Page 22 – Indicador de recarga
- Page 23 – Fijar a la mitad del radio de acción
- Page 24 – mientas eléctricas; Conectores rápidos
- Page 25 – MILWAUKEE ELECTRIC TOOL CORPORATION; MILWAUKEE Service; factory; Canada - Service MILWAUKEE; MEXICO - Soporte de Servicio
FINISH STAPLER
AGRAFEUSE DE FINITION
ENGRAPADORA DE ACABADO
Cat. No.
No de cat.
7155-21
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LES RISQUES DE BLESSURES, L’UTILISATEUR DOIT LIRE
LE MANUEL DE L’OPÉRATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER EL MANUAL
DEL OPERADOR.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
4 5 TERMINOLOGY Magazine Capacity 101 staples Operating Pressure min. 70 PSI max. 120 PSI Cat. No. 7155-21 Specifi cations Symbology Air Consumption .03 ft 3 /cycle at 100 psi Air Inlet 1/4 in. NPT Read the Operator's Manual Wear Eye Protection Keep hands away Fastener Length min. 0.375" max. 1....
8 9 Installing Fastener Strips 1. Lay the tool on its side and point the nose of the tool away from yourself and others. 2. Press the pusher release button and gently slide back the pusher assembly. Do not allow the pusher assembly to slide back fast. Connecting the Air Supply Use only clean, dry co...
10 11 OPERATION Selecting Actuation Mode The selectable trigger can be set to either Single Sequential Actuation mode or Contact Actuation mode. 1. P u s h i n a n d h o l d t h e A c t u a t i o n Selector. 2. Rotate the Selector to Single Sequen- tial Actuation (T) or Contact Actuation (TTT). 3. R...
