Milwaukee 6742-20 Wiring 2003- User Manual
Milwaukee 6742-20 Wiring 2003– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
SINGLE REDUCTION PISTOL GRIP TOOLS
58-01-1800
DATE
Jan. 2003
MILWAUKEE ELECTRIC TOOL CORP. 13135 WEST LISBON RD. BROOKFIELD, WIS.
BULLETIN
WIRING INSTRUCTIONS
TITLE
Drwg. 3
Terminals, Connectors and 1 or 2 End Wire Preparation
Wire
Color
Origin or
Gauge
Wire
No.
Length
WIRING SPECIFICATIONS
BULK LEAD WIRE - BULLETIN NO. 58-01-0003
Grounding terminal
Green ground wire #3 connects
to male tab of grounding terminal.
Position terminal as shown.
(Grounded models only).
Route blue brush wire #6 and
white brush wire #5 through
wire traps over rear bearing
bore as shown.
FOR DOUBLE INSULATED TOOLS
DISREGARD GREEN GROUND WIRE #3
AND THE GROUNDING TERMINAL
Insert black wire #1
in the hole marked
2
↓
on the bottom
of the switch
Heat
Sink
For grounded tools with
3-wire quik-lok cords,
orientate the pin housing
assembly as shown and place
white wire #2 first into the
bottom of the handle portion of
the motor housing.
For double insulated tools
with 2-wire quik-lok cords,
orientate the blade housing
assembly as shown and place
white wire #2 first into the bottom
of the handle portion of the motor
housing.
In the main trap, route green ground wire #3
in the bottom followed by the white wire #2
and black wire #4 on the top.
Route black lead #4 through any of the three
traps on the tab of the motor housing and
insert into hole 2 on bottom of switch (Hole is
marked with a 2 on side of switch).
Route green ground wire #3 and
white wire #2 around the post in
the motor housing. Wires cannot
touch the heat sink of the switch.
Post
Rear bearing bore
Fixed cord
s h o w n
Black wire #1 Black wire #4
If screw is
present
seat
s c r e w
fully.
Bottom
view of
s w i t c h
1
Black
*
-----
*Component of cord set, pin hsg. assy. or blade hsg. assy.
2
White
*
-----
*Component of cord set, pin hsg. assy. or blade hsg. assy.
3
Green
*
-----
*Component of cord set, pin hsg. assy. or blade hsg. assy.
4
Black
**
-----
**Component of the brush card assembly.
5
White
**
-----
**Component of the brush card assembly.
6
Blue
**
-----
**Component of the brush card assembly.
7
Brown
**
-----
**Component of the brush card assembly.
Route green ground wire #3 and jumper wire (white)
in recessed area of brush card as shown.
.25 min.
SCHEMATIC
T2
T2
(T1)
TERMINAL DESCRIPTION
Part No.
Code
Qnty.
T1
23-74-0605
1
T2
23-74-1060
4
Jumper
Wire
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
