Milwaukee 6/1/1676 - Manual

Milwaukee 6/1/1676

Milwaukee 6/1/1676 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
Page: / 7

Table of Contents:

  • Page 2 – Unmodified plugs and matching outlets; under the influence of drugs, alcohol; Carrying tools with your finger on; source and/or the battery pack from; MILWAUKEE
  • Page 3 – shock. Check with a qualified electri; use. If the plug will not fit the outlet,; GROUNDING
  • Page 4 – READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE.; EXTENSION CORDS; adjustments. Use only specifically; many types of bits designed for specific
  • Page 5 – drill against a solid fixed object in
  • Page 6 – screw into the work by flicking the trigger; WARNING; WARNING; taining ammonia. Never use flammable or
Loading the manual

TO REDUCE THE RISK OF INJURY, USER MUST READ OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE LE
MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER EL MANUAL
DEL OPERADOR.

OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR

HEAVY-DUTY HOLE HAWG

®

FOREUSE EXTRA-ROBUSTE HOLE HAWG

®

TALADRO HEAVY-DUTY HOLE HAWG

®

Catalog No.

No de Cat.

Catálogo No.

1670-1
1675-1
1675-6
1676-6

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Unmodified plugs and matching outlets; under the influence of drugs, alcohol; Carrying tools with your finger on; source and/or the battery pack from; MILWAUKEE

2 3 WORK AREA SAFETY ELECTRICAL SAFETY PERSONAL SAFETY WARNING READ ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term "power tool" in all of the warnings listed below refers to your mains-operated (corded) powe...

Page 3 - shock. Check with a qualified electri; use. If the plug will not fit the outlet,; GROUNDING

4 5 The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire con-nected to the tool's grounding system and must never be attached to an electrically “live” terminal.Your tool must be plug...

Page 4 - READ AND SAVE ALL INSTRUCTIONS FOR FUTURE USE.; EXTENSION CORDS; adjustments. Use only specifically; many types of bits designed for specific

6 7 Grounded tools require a three wire exten-sion cord. Double insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop i...

Other Milwaukee Models