Milwaukee 5619-20 Wiring- User Manual
Milwaukee 5619-20 Wiring– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
WIRING INSTRUCTIONS
1
Black
22-64-0815
4-3/4"
Component of cord assembly. Strip 3/16" for T1.
2
White
22-64-0815
4-3/4"
Component of cord assembly. Strip 3/16" for T3.
3
Black
23-66-2275
2-1/2"
Component of switch assembly. Strip 3/16" for T2.
4
Black
22-64-0820
3"
Component of power cord assembly. Strip 3/16" for T4.
5
White
22-64-0820
4"
Component of power cord assembly. Strip 3/16" for T4.
6
Black
23-33-0065
4"
Component of receptacle outlet assy. Strip 3/16" for T4.
7
White
23-33-0065
3"
Component of receptacle outlet assy. Strip 3/16" for T4.
D-HANDLE ROUTER
58-01-0715
DATE
Oct. 2003
MILWAUKEE ELECTRIC TOOL CORP. 13135 WEST LISBON RD. BROOKFIELD, WIS.
BULLETIN
TITLE
Drwg. 2
Terminals, Connectors and 1 or 2 End Wire Preparation
Wire
Color
Origin or
Gauge
Wire
No.
Length
WIRING SPECIFICATIONS
TERMINAL DESCRIPTION
Part No.
Code
Qnty.
T1
23-74-0065
1
T2
23-74-1060
1
T3
23-74-0605
1
T4
23-74-0850
4
BULK LEAD WIRE - BULLETIN NO. 58-01-0003
NOTE:
All lead lengths are before stripping.
All leads must be held to ± .125"
unless specified elsewhere.
Strip wire per ES 13-11.
Crimp terminals per ES 13-15.
White
Black
Black
White
White
Black
Black
White
White
Black
Black
From
receptacle
outlet
From power cord
Connector
terminal
No. 23-74-0055
Cord jacket to extend past
cord clamp approx. 1/4".
Remove slack from cord wires #1
and #2 between wire traps. Wires
are not to extend into frame
opening.
Black cord wire #1 is connected
to the switch. White cord wire #2
is connected to the field
terminal, as shown.
Route black switch lead #3 to
brush holder, as shown.
Black switch lead #3 must be
placed in wire trap prior to
white cord lead #2.
Order of cord
wires in traps is
interchangeable.
Route brush
shunt wires
(2 places) to
brush holder,
as shown.
Route white
wires #5 and #7
to the top (trigger end)
of the switch. Route black
wires #4 and #6 to the
bottom of the switch.
Insert cord plug into
receptacle outlet.
T4
SEE REVERSE SIDE FOR MODELS WHERE WIRE
#3 IS A SEPARATE LEADWIRE ASSEMBLY AND
IS NOT SOLDERED TO THE SWITCH.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
