Milwaukee 5339-20 - User Manual
Milwaukee 5339-20 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTRUCTIONS; Disassembly
- Page 3 – Position machine in a vertical position.
- Page 9 – Remove the following parts:
- Page 11 – Maintenance; OR
- Page 15 – Assembly; Install the following parts:
- Page 16 – Install the following pre-lubricated parts
- Page 18 – Apply Blue loctite
- Page 19 – ram prior to assembly.
- Page 20 – Secure hammer gear box in a machinists
- Page 22 – Spring clip
58-92-5305 d1
022005
Cat. No. 5339-20
SDS Max Demolition Hammer
Cat. No. 5342-20
SDS Max Rotary Hammer
MILWAUKEE ELECTRIC TOOL CORPORATION
13135 W. LISBON ROAD • BROOKFIELD, WISCONSIN 53005-2550
REPAIR
INSTRUCTIONS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Milwaukee 5339-20
Summary
2 PAGE INSTRUCTIONS REPAIR 58-92-5305 d1 Special Tools Require – Forcing discs 61-10-0011 – Hex key 4 mm– Hex key 5 mm– Sleeve 61-10-0013 – Pin-type face spanner 61-10-0012 – Spindle Fixture (optional) 61-30-0290 Important! – Before beginning the maintenance work, perform an initial check with a hig...
3 PAGE INSTRUCTIONS REPAIR 58-92-5305 d1 Removing the spring ring 1 Remove both retainers (1). 2 Slightly spread spring ring (2) and pull it off the machine towards the front. Removing the end cover cap ☞ Position machine in a vertical position. 1 Depress sleeve (2) and remove end cover cap (1) with...
9 PAGE INSTRUCTIONS REPAIR 58-92-5305 d1 Removing the lower gear box cover 1 Remove two screws (1) and remove lower gear box cover (2). ☞ The exposed plane surface serves only for manufacturing the gear box and has no other function! Disassembling the electronic component 1 Remove the four screws (1...
