Milwaukee 4262-1 - User Manual
Milwaukee 4262-1 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – MILWAUKEE
- Page 4 – EXTENSION CORDS
- Page 6 – APPLICATIONS; Drilling; DANGER
- Page 7 – Using Twist Drills; • These bits require the use of HAWG; WARNING; Lubrication
- Page 10 – DESCRIPTION FONCTIONNELLE
- Page 11 – LISEZ ATTENTIVEMENT CES INSTRUCTIONS ET CONSERVEZ-LES; Spécifi cations
- Page 12 – AVERTISSEMENT; Assemblez les leviers de commande et; MANIEMENT; incés
- Page 14 – Perçage; Taraudage
- Page 16 – Entretien de l’outil; Nettoyage; Chaîne de sûreté
- Page 18 – Agarre la herramienta por los aside-; Simbología
- Page 19 – LEA Y GUARDE TODAS LAS INSTRUCCIONES PARA; EXTENSIONES ELECTRICAS; Calibre mínimo recomendado para; Amperios; Capacidad Máxima Recomendada; Especifi caciones
- Page 22 – Para perforar; APPLICACIONES; Para ahusar
- Page 23 – Cómo utilizar brocas helicoidales; Lubricación; • Para trabajar con este tipo de; ADVERTENCIA; Procedimiento para cortar
- Page 25 – MILWAUKEE ELECTRIC TOOL CORPORATION; MILWAUKEE Service; M I LWA U K E E; Canada - Service MILWAUKEE; MEXICO - Soporte de Servicio; authorized; Registre su herramienta en línea, en
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
Cat. No.
No. de Cat.
4253-1
4262-1
4292-1
4297-1
HEAVY-DUTY DRILL MOTORS, ELECTROMAGNETIC DRILL
STANDS, ELECTROMAGNETIC DRILL PRESSES
PERCEUSES ÉLECTROMAGNÉTIQUES, COLONNES ET MOTEURS
DE PERCEUSES EXTRA ROBUSTES
MOTORES PARA TALADRADORAS EXTRARESISTENTES, BASES
ELECTROMAGNÉTICAS PARA TALADRADORAS, PRENSAS
TALADRADORAS ELCTROMAGNÉTICAS
Cat. No.
No. de Cat.
4204-1
4206-1
4208-1
4210-1
Cat. No.
No. de Cat.
4202
4203
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND
OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER
EL MANUAL DEL OPERADOR.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Milwaukee 4262-1
Summary
2 3 GENERAL SAFETY RULES — FOR ALL POWER TOOLS WORK AREA SAFETY ELECTRICAL SAFETY PERSONAL SAFETY WARNING READ ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, fi re and/or serious injury. The term "power tool" in all of the warnings listed below...
6 7 Grounded tools require a three wire exten-sion cord. Double insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a serious drop i...
10 11 To start the drill: 1. Push the magnet button to activate the magnet. 2. Make sure the red indicator light is on. If the light is fl ashing, check for the fol-lowing: • Low voltage at plug • Loose motor connection • Mag panel buttons are jammed or stuck If fl ashing light still occurs, take en...
