Milwaukee 4204-1 - User Manual
Milwaukee 4204-1 – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Symbology; SPECIFIC SAFETY RULES FOR MAG STANDS
- Page 5 – READ AND SAVE ALL INSTRUCTIONS
- Page 6 – ASSEMBLY
- Page 7 – OPERATION
- Page 8 – on
- Page 9 – APPLICATIONS
- Page 11 – MAINTENANCE; ACCESSORIES
Catalog Nos.
Nos. de Cat.
Catálogo Nos.
4253-1
4262-1
4292-1
4297-1
HEAVY-DUTY DRILL MOTORS, ELECTROMAGNETIC DRILL STANDS,
ELECTROMAGNETIC DRILL PRESSES
PERCEUSES ÉLECTROMAGNÉTIQUES, COLONNES ET MOTEURS DE
PERCEUSES EXTRA ROBUSTES
MOTORES PA R A TALADRADORAS EXTRARESISTENTES, BASES
ELECTROMAGNÉTICAS PARA TALADRADORAS, PRENSAS TALADRADORAS
ELCTROMAGNÉTICAS
Catalog Nos.
Nos. de Cat.
Catálogo Nos.
4204-1
4206-1
4208-1
4209-1
4210-1
Catalog Nos.
Nos. de Cat.
Catálogo Nos.
4202
4203
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE
MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL DEL
OPERADOR.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Milwaukee 4204-1
Summary
page 3 1. Always use safety chain. Mounting can release when drilling overhead or on a vertical surface (See Safety Chain under Operation). 2. Clean the surface before attaching the drill stand to the work surface. Paint, rust, scale, or uneven surfaces decrease the holding strength or the magne...
page 5 Grounded tools require a three wire extension cord. Double insulated tools can use either a two or three wire extension cord. As the distance from the supply outlet increases, you must use a heavier gauge exten- sion cord. Using extension cords with inadequately sized wire causes a serious dr...
page 6 1. Assemble the feed handles and grips to the feed handle hub. Tighten securely. 2. To mount the feed handle to the opposite side, remove the wing screw assembly that secures the hub/pinion assembly. Pull out the hub/pinion assembly and insert on the other side of the housing. Replace and tig...
