Milwaukee 0615-20 - Manual
Milwaukee 0615-20 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – MILWAUKEE; Specifi cations
- Page 4 – Side
- Page 7 – Maintaining Tool; Cleaning
- Page 10 – Rainure
- Page 21 – MILWAUKEE ELECTRIC TOOL CORPORATION; MILWAUKEE Service; factory; authorized; Canada - Service MILWAUKEE; autorizados; centre d’entretien; MEXICO - Soporte de Servicio
14.4 V AND 18 V LOK-TOR II 1/2" HAMMER-DRILLS & DRIVER DRILLS
PERCEUSE À PERCUSSION ET PERCEUSE-VISSEUSE DE 14,4 V ET 18
V 13 mm (1/2") LOK-TOR II
TALADRO DE PERCUSIÓN Y TALADRO ATORNILLADOR DE 13 mm
(1/2") LOK-TOR II Y 14,4 V Y 18 V
0615-20 Lok-Tor II Driver Drill
0617-20 Lok-Tor II Hammer-Drill
0625-20 Lok-Tor II Driver Drill
0627-20 Lok-Tor II Hammer-Drill
Cat. No.
No de Cat.
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE LE
MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER EL MANUAL
DEL OPERADOR.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
4 5 5 6 1 2 3 4 7 FUNCTIONAL DESCRIPTION 1. Tool holder 2. Trigger 3. Control switch 4. Hammer/drill selector collar (Hammer-Drill models only) 5. Keyless chuck 6. Side handle 7. Torque selector collar 8. Side handle ribs 9. Speed selector Capacities Steel 1/2" 1/2" 1/2" 1/2" Wood Fl...
6 7 Inserting Battery Pack into Tool The battery pack may feel warm after the charging cycle. If it is warm, maximize the output of the battery by allowing it to cool for a few minutes before inserting it into the tool. Battery pack can be inserted into the tool in two ways.1. For working in restric...
12 13 Bit Binding A high rotational force occurs when a bit binds. If the bit binds, the tool will be forced in the opposite direction of the bit rotation. Bits may bind if they are misaligned or when they are breaking through a hole. Wood boring bits can also bind if they run into nails or knots. B...
