Miele F1411SF - Manual

a Door shelves (height adjustable) b Shelves (height adjustable) c Ice cube maker d Ice cube container e Control panel f Main switch to turn the applianceOn/Off g Freezer baskets h Water filter Guide to the freezer 7

Control panel a Access button " p " activates the control panel b Temperature display X colder; Y warmer Allows you to set the desiredtemperature in the freezer c On/Off sensor button for theSuperCool function d On/Off sensor button for the ice cubemaker e Sensor button for the temperaturean...

Before using for the first time The stainless steel surface of theappliance is protected with a plasticfilm, which protects it during shipping. Do not remove this protective film untilthe appliance has been completelyinstalled. After removing the protective film cleanthe exterior surface with the su...

Using the settings When a sensor button has beenselected with a finger touch, it willappear yellow.A de-selected button will appear white. ^ Touch the access button " p " so it turns yellow. On the control panel you will seeadditional sensor buttons to operate theappliance. These buttons all...

The appliance is equipped with analarm system, to ensure that thetemperature does not rise unnoticedbecause of energy loss or an opendoor. The alarm system is alwaysoperational, it does not need to beswitched on. Temperature alarm If the temperature becomes too warm,an alarm sounds and the "alar...

Setting the temperature ^ Touch the access button " p " so it turns yellow. ^ Use the X and Y buttons next to the temperature display to set thetemperature warmer or colder. Tap the X and Y sensor buttons to raise/lower the temperature 1°, or holdit down to move through thetemperature range ...

Freezing food Fresh food should be frozen as quicklyas possible. This helps maintain thenutritional value, vitamin content,appearance and taste of the food. Never refreeze partially or fullydefrosted food. Consume defrostedfood as soon as possible, it will lose itsnutritional value and spoil if left...

Defrosting Frozen food can be defrosted indifferent ways: – in a microwave oven, – at room temperature, – in the refrigerator (the cold given off by the frozen food helps to keep theother food cold), – in a steam oven. Poultry It is especially important to observe proper hygiene whendefrosting poult...

When the SuperCool function isactivated, the appliance is cooled ascold as possible (to a factory-presettemperature). SuperCool The SuperCool function is ideal forfreezing large quantities of unfrozenfood. Ideally the function should beswitched on 4 - 6 hours before the foodis placed in the freezer....

For the automatic ice cube maker tooperate, it must be connected to thehousehold water supply. See"Plumbing". Turning on the ice cube maker Make sure that the ice cube containeris under the ice cube maker, as far aspossible. Ice cubes will not be producedunless the container is completelyclo...

The freezer defrosts automatically. The moisture generated in theappliance collects in the evaporator. Itis automatically defrosted anddissipated by the condenserperiodically. This automatic defrosting systemenables the freezer to remainpermanently ice-free, while ensuringthat the food stored in the...

Moving the shelves The shelves can be adjusted accordingto the height of the food. ^ Using both hands, grasp the shelffrom underneath and lift slightly sothat the rear of the shelf is slightlyabove the mountings. ^ Pull the shelf forward. ^ Move the shelf to the desired height,then insert the (rear)...

Ice cube container The ice cube container is set ontelescopic tracks, and can be removedfor loading, unloading and cleaning. ^ Slide the container forward untilresistance is felt. ^ On both sides of the container, pullthe latches (see arrow) upward andlift the container out of the freezer. Push the ...

To reduce the risk of electricalshock, disconnect the appliancefrom the power supply by shuttingoff the power main, tripping thecircuit breaker or unplugging thepower cord before maintenance. Never use cleaning agentscontaining abrasive substancessuch as sand, soda, acids, chloridesor chemical solve...

Appliance door ^ Stainless steel surfaces can becleaned using a non-abrasivestainless steel cleaner. ^ To help prevent resoiling, aconditioner for stainless steel canalso be used. Apply sparingly witheven pressure. Aluminum frames The shelf frames are made ofaluminum. ^ Clean the frames with a mild ...

Changing the light bulb The lighting automatically switches offafter the door has been open forapprox. 5 minutes. This is not a fault. After the bulb has cooled for a shorttime it will turn on again. If the light does not come on when thedoor is opened briefly, the light bulbshould be changed. ^ Use...

Side lighting ^ Turn the light cover counterclockwiseand pull out. Never touch a halogen bulb withbare fingers.When inserting a glass halogen bulbalways hold with a soft cloth. ^ Pull the defective light bulb from thesocket. ^ Place the new bulb in the socket.Halogen bulb type:5 W/12 V/socket G 4. ^...

The water filter improves the taste andsmell of ice cubes by removing chlorineand other substances from theincoming tap water. It is important to change the waterfilter regularly. To avoid serious illness or death, donot use water that ismicrobiologically or chemicallyunsafe or of unknown quality wi...

Exchanging the water filter ^ Push in and rotate the filter cap onthe base panel of your appliancecounterclockwise 180°, 1 . ^ Pull the used filter cartridge out of theappliance, 2 . ^ Remove the cap from the used filter, 3 . ^ Take a new filter cartridge out of thepackaging and remove the protectiv...

Re-setting the filter indicator The filter indicator still flashes in thedisplay. ^ Touch the access button " p " so it turns yellow. ^ Note the position of the X button, but do not touch. ^ Touch the access button " p " again so it turns white. Only the access button " p " i...

^ Tap the X button until ^ - appears in the display. ^ Touch the access button " p ". ^ Tap the X button until ; appears in the display. ^ Touch the access button " p ". You have left the Custom settingsmode. The "filter" indicator is no longer visibleon the control panel. Wh...

Filter Performance Data Sheet 32 State of California Department of Public Health Water Treatment Device Certificate Number Date Issued: March 10, 2006 Trademark/Model Designation Replacement Elements Date Revised: April 3, 2008 1775 06 - 9000 077095 9000 077104 Miele 07134220 07134220 Manufacturer: ...

With the aid of the following guide minor problems can be corrected without a ser-vice call. Repairs should only be carried out by a qualified and trained person in strictaccordance with local and national safety regulations. Unauthorized repairscould cause personal injury or machine damage and may ...

In the event of a fault which you cannoteasily fix yourself, please contact theMiele Technical Service Department atthe address on the back of this booklet. When contacting the Technical ServiceDepartment, please quote the modeland serial number of your appliancegiven on the data plate inside theapp...

Installation instructions To prevent accidentsand machine damageread these instructions before installation or use.

Disposal of packing materials The cardboard box and packingmaterials are biodegradable andrecyclable. Please recycle. Ensure that any plastic wrappings,bags, etc., are disposed of safely andkept out of the reach of babies andyoung children. Danger of suffocation! Disposal of an old appliance Old app...

Have the appliance installed by aqualified technician, according tothe enclosed installation instructions. , WARNING This appliance is top-heavy andmust be secured to prevent it fromtipping forward.Keep the door closed until theappliance is completely installedand secured as per the installationinst...

Installation options There are many different installationoptions. You are limited only by thedesign of the kitchen. The door hinge cannot beexchanged. Single column The appliance can be installed at anypreferred location in the kitchen. However, be sure the door will openand close properly in the c...

Installation with partition using the"Merging Kit" The minimum thickness of the partitionis 5 / 8 " (16 mm). If there is a partition with a thickness from 5 / 8 " (16 mm) to 6 5 / 16 " (160 mm) between the adjacent appliances, theneach appliance should be individuallyinstalled wi...

Niche dimensions A B F 1411 SF 18 ½" (469.8 mm) 18" (457 mm) Dimensions 49

Power supply and water connection 1. Power supply2. Water connection A F 1411 SF 9" (229 mm) Door dimensions (open 115°) A B F 1411 SF 20 11 / 16 " (525 mm) 9 3 / 16 " (234 mm) Dimensions 50

Before you begin Read these instructions completelyand carefully.Have the appliance installed by aqualified technician, according tothe enclosed installation instructions. To reduce the risk of injury ordamage to the product, two peopleshould be used for installation. These installation instructions...

Check the installation niche To ensure a safe, trouble-freeinstallation and the best possiblecosmetic result, check to be surethat the installation space complieswith the installation requirements. ^ Check the base (see "Installation"). ^ Check the dimensions of the cavity. ^ Check that the ...

If the indicator light does not come on,installation of the module wasunsuccessful. In that case, repeat theprocess. If that does not correct theproblem, contact Miele. ^ Pull the antenna d straight out. ^ Guide the cover b over the antenna d and screw on the cover. ^ Angle the antenna d so that it ...

Aligning the appliance ^ Align the appliance with thesurrounding cabinets. The height-adjustable feet at the frontand rear can all be adjusted from thefront. – Front: with an open-ended wrench ½" (SW 13).The feet can be adjusted from thetop and bottom e . – Rear: with a 5 / 16 " (8 mm) hex n...

Attaching the toe-kick cover The maximum height of the toe-kickcover is 4" (101 mm) from the top ofthe floor. Do not cover the ventilationslits in the plinth. Risk of damage tothe appliance. ^ If required, cut the toe-kick cover tothe required length and height. ^ Attach the plinth to the applia...

Mounting the air separator The air separator keeps the supply andexhaust air separate. This preventswarm exhaust air from flowing into themachine, optimizing the energyperformance of the unit. ^ If necessary, shorten the three partsof the air separator. ^ Insert the foam pieces back into thesides. ^...

All plumbing work should be carriedout by a suitably qualified andcompetent person, in accordancewith all applicable local and nationalregulations. The water quality must conform tocountry requirements for drinkingwater. – The appliance is only suitable for connection to the cold water supply. – The...

Preparing the water connection The connection to the householdwater supply must be installedbefore the appliance is installed. ^ Turn off the main water valve to preventdamage caused by leaking water. ^ Attach the connecting pipe to theshut-off valve, according to theinstructions supplied by themanu...

Connecting the water supply When connecting the water pipe tothe solenoid valve of the appliance,follow the instructions supplied bythe manufacturer of the ice cubemaker installation kit. When bending the water pipe, be surenot to kink it, otherwise there is a risk ofleaks and water damage.Use bendi...

, Avoid the risk of electrical shock- Plug into a grounded 3-prongoutlet.- Do not move the ground plug.- Do not use an adapter.- Do not use an extension cord. Failure to follow these instructionscan result in death, fire, or electricalshock. Improper connection of theequipment grounding conductormay...

MasterCool control panel options for RemoteVision Status indicators Description of function Flashing ; ~ Module booting phase Flashing ; ‡ Not connected to network Flashing ; | Connection to network established, no IP addressassigned Solid ; # Connected to network Flashing ; < In Ad-Hoc Mode, not...