Miele F 1411 Vi - Manual

a Door shelves (height adjustable) b Shelves (height adjustable) c Ice cube maker d Ice cube container e Control panel f Main switch to turn the applianceOn/Off g Freezer baskets h Water filter Guide to the freezer 8

Control panel a Access button " p " b Temperature display X colder; Y warmer Allows you to set the desiredtemperature in the freezer c On/Off sensor button for theSuperCool function d On/Off sensor button for the ice cubemaker e Sensor button for the temperatureand door alarm* f Water filter...

Before using for the first time ^ Clean the inside of the appliance andthe accessories with a mild solutionof warm water and liquid dish soap.Dry with a soft cloth. If the appliance was transported tothe installation site horizontally,leave the appliance standingupright for approx. 8 hours beforecon...

Using the settings This appliance is operated with the useof touch keys activated by a finger. – An available button will appear white. – A selected button will appear yellow. ^ Touch the access button " p " so it turns yellow. On the control panel you will seeadditional sensor buttons to op...

The appliance is equipped with analarm system, to ensure that thetemperature does not rise unnoticedbecause of energy loss or an opendoor. The alarm system is alwaysoperational, it does not need to beswitched on. Temperature alarm If the temperature becomes too warm,an alarm sounds and the "alar...

Setting the temperature ^ Touch the access button " p " so it turns yellow. ^ Use the X and Y buttons next to the temperature display to set thetemperature warmer or colder. Tap the X and Y sensor buttons to raise/lower the temperature 1°, or holdit down to move through thetemperature range ...

Freezing food Fresh food should be frozen as quicklyas possible. This helps maintain thenutritional value, vitamin content,appearance and taste of the food. Never refreeze partially or fullydefrosted food. Consume defrostedfood as soon as possible, it will lose itsnutritional value and spoil if left...

Defrosting Frozen food can be defrosted indifferent ways: – in a microwave oven, – at room temperature, – in the refrigerator (the cold given off by the frozen food helps to keep theother food cold), – in a steam oven. Poultry It is especially important to observe proper hygiene whendefrosting poult...

When the SuperCool function isactivated, the appliance is cooled ascold as possible (to a factory-presettemperature). SuperCool The SuperCool function is ideal forfreezing large quantities of unfrozenfood. Ideally the function should beswitched on 4 - 6 hours before the foodis placed in the freezer....

For the automatic ice cube maker tooperate, it must be connected to thehousehold water supply. See"Plumbing". Turning on the ice cube maker ^ Make sure that the ice cubecontainer is under the ice cubemaker, as far as possible. Ice cubes will not be produced unlessthe container is completely ...

The freezer defrosts automatically. The moisture generated in theappliance collects in the evaporator. Itis automatically defrosted anddissipated by the condenserperiodically. This automatic defrosting systemenables the freezer to remainpermanently ice-free, while ensuringthat the food stored in the...

Moving the shelves The shelves can be adjusted accordingto the height of the food. ^ Using both hands, grasp the shelffrom underneath and lift slightly sothat the rear of the shelf is slightlyabove the mountings. ^ Pull the shelf forward. ^ Move the shelf to the desired height,then insert the (rear)...

Ice cube container The ice cube container is set ontelescopic tracks, and can be removedfor loading, unloading and cleaning. ^ Slide the container forward untilresistance is felt. ^ On both sides of the container, pullthe latches (see arrow) upward andlift the container out of the freezer. Push the ...

To reduce the risk of electricalshock, disconnect the appliancefrom the power supply by shuttingoff the power main, tripping thecircuit breaker or unplugging thepower cord before maintenance. Never use cleaning agentscontaining abrasive substancessuch as sand, soda, acids, chloridesor chemical solve...

Before cleaning ^ Use the main switch to turn theappliance off completely. The main switch is located on the rightside underneath the control panel. ^ Unplug the power cord. ^ Remove any food from the applianceand store it in a cool place. ^ Take out any removable parts,e.g., shelves. Cleaning the i...

Ventilation slits ^ Check the ventilation slits in the basepanel regularly. Remove anydirt/dust with a vacuum cleaner orbrush. Clean as needed. Door seals Do not use any oils or grease on thedoor seals. This may cause theseals to deteriorate and becomeporous over time. ^ Clean the door seals with wa...

Changing the light bulb The lighting automatically switches offafter the door has been open forapprox. 5 minutes. This is not a fault. After the bulb has cooled for a shorttime it will turn on again. If the light does not come on when thedoor is opened briefly, the light bulbshould be changed. ^ Use...

Side lighting ^ Turn the light cover counterclockwiseand pull out. Never touch a halogen bulb withbare fingers.When inserting a glass halogen bulbalways hold with a soft cloth. ^ Pull the defective light bulb from thesocket. ^ Place the new bulb in the socket.Halogen bulb type:5 W/12 V/socket G 4. ^...

The appliance is supplied with anactive charcoal filter which improvesthe taste and smell of ice cubes byremoving chlorine and othersubstances from the incoming tapwater. Additional water filters are availablefrom Miele. It is important to change the waterfilter regularly. To avoid serious illness o...

Exchanging the water filter Note: Air trapped in the system maycause water and the filter cartridgeto eject forcefully. Use caution whenremoving. ^ Push in and rotate the filter cap onthe base panel of your appliancecounterclockwise 180°, 1 . ^ Pull the used filter cartridge out of theappliance, 2 ....

^ After the filter change the filterindicator in the display still flashes.The change must be be confirmed inthe electronic. Confirming the filter change ^ Press and hold the filter changesensor button. ^ At the same time place a finger onthe access button. Press and holdboth sensor buttons for appr...

This product F 1411 Vi (KIMSDF18US) is tested and certified by WQA againstORD0902 for California "lead free" compliance. Miele & Cie. KGCarl-Miele-Straße 29D-33332 Gütersloh Lead free certificate 35

With the aid of the following guide minor problems can be corrected without a ser-vice call. Repairs should only be carried out by a qualified and trained person in strictaccordance with local and national safety regulations. Unauthorized repairscould cause personal injury or machine damage and may ...

General problems Issue Possible fault Solution Water is flowing out ofthe appliance. Close the shut-off valve immediately. Check whether the waterpipe in the appliance isdefective. Contact Miele TechnicalService. Check whether the waterpressure is too low. Contact a plumber. Check whether the correc...

Problems with the ice maker Issue Possible fault Solution The ice cubes aresmall. Other domestic appliancesthat use water are inoperation. Avoid using such items as adishwasher, washingmachine or shower at thesame time. Check whether the waterfilter needs changing. See "Water filter" for mor...

Problems with the ice maker Issue Possible fault Solution The ice maker is notproducing enough iceor the ice cubes aremisshapen. Check the waterpressure. The waterpressure must bebetween 25 and 80 psi(1.7-5.5 bar). Contact a plumber. Check that the freezertemperature is too high. See "Selecting ...

In the event of a fault which you cannoteasily fix yourself, please contact theMiele Technical Service Department atthe address on the back of this booklet. When contacting the Technical Servicedepartment, please quote the modeland serial number of your appliancegiven on the data plate inside theapp...

Installation Instructions Information is subject to change. Please refer to our website to obtain the mostcurrent product specification, technical & warranty information. To prevent accidentsand machine damageread these instructions before installation or use.

Disposal of packing materials The cardboard box and packingmaterials are biodegradable andrecyclable. Please recycle. Ensure that any plastic wrappings,bags, etc., are disposed of safely andkept out of the reach of babies andyoung children. Danger of suffocation! Disposal of an old appliance Old app...

Have the appliance installed by aqualified technician, according tothe enclosed installation instructions. WARNINGThis appliance is top-heavy andmust be secured to prevent it fromtipping forward.Keep the door closed until theappliance is completely installedand secured as per the installationinstruc...

Installation with partition using the"Merging Kit" The minimum thickness of the partitionis 5 / 8 " (16 mm). If there is a partition with a thickness from 5 / 8 " (16 mm) to 6 5 / 16 " (160 mm) between the adjacent appliances, theneach appliance should be individuallyinstalled wi...

Door dimensions (open 115°) A B C D F 1411 Vi 20 11 / 16 " (525 mm) Door front max. 1 1/2" (38 mm) Doorhandle 9 3 / 16 " (234 mm) The dimensions of the door fronts and handles will vary according to eachindividual kitchen. Miele recommends using the full door opening angle of 115° for th...

Niche dimensions Niche width (A) F 1411 Vi 18" (457 mm) Dimensions 51

Before you begin Read these instructions completelyand carefully.Have the appliance installed by aqualified technician, according tothe enclosed installation instructions. To reduce the risk of injury ordamage to the product, two peopleshould be used for installation. These installation instructions...

Aligning the housing unit The housing unit must be carefullyaligned using a spirit level beforeinstalling the appliance. The unitcorners must be at right angles, asotherwise the furniture door will notalign correctly with the 4 corners of theappliance. – The side panels of the housing must be even. ...

Mounting Accessories The mounting accessories needed forinstalling the appliance into the nicheare included in the packaging. Severalplastic bags are included which aremarked alphabetically. The bag needed for each step will bemarked with its respective letter. Anti-tip brackets The anti-tip bracket...

^ Now attach the installation niche tothe wall. The built-in cabinet must be secured tothe wall behind it with several screws. In a cabinet with a back wall ^ screw the back wall of the cabinet inseveral places directly to the wallbehind it.For this, use suitable plugs/screwsdepending on the type of...

Sliding the appliance into theniche If a side-by-side installation isdesired, connect the two appliancestogether. See the Installation Manualincluded with the "Merging Kit". ^ Unscrew the plinth. ^ To protect the corners of theinstallation space, attach edgeprotectors where needed (notinclud...

Aligning the appliance ^ Align the appliance with the customfront. The installation aids c on the appliance door have been designed forcustom door thicknesses of 3/4"(19 mm) and 1 1/2" (38 mm). The height-adjustable feet at the frontand rear can all be adjusted from thefront: – Front feet: A...

Preparing the custom door ^ Open the appliance door. ^ Unscrew the installation supports l from the appliance door. ^ Loosen the remaining screws fromthe strips m on each side of the door, then remove. ^ Set aside the screws and side strips m - you will need them again later. ^ Remove the light swit...

Attaching the covers ^ To mount the cover strips on bothsides of the door, click them intoplace from bottom to top, into thegap between the appliance door andthe custom door. ^ Screw the brackets onto both sidesof the appliance, to hold the coverstrip. ^ Insert the cover strip into the spacebetween ...

Attaching the toe-kick cover The maximum height of the toe-kickcover is 4" (102 mm) from the top ofthe floor. Do not cover the ventilationslits in the plinth. Risk of damage tothe appliance. ^ If required, cut the toe-kick cover tothe required length and height. ^ Attach the plinth to the applia...

Mounting the air separator The air separator keeps the supply andexhaust air separate. This preventswarm exhaust air from flowing into themachine, optimizing the energyperformance of the unit. ^ If necessary, shorten the three partsof the air separator. ^ Insert the foam pieces back into thesides. ^...

All plumbing work should be carriedout by a suitably qualified andcompetent person, in accordancewith all applicable local and nationalregulations. Disconnect the appliance from theelectrical power supply beforeconnecting it to the water supply. Turn off the water supply beforeconnecting the water l...

Preparing the water connection The connection to the householdwater supply must be installedbefore the appliance is installed. ^ Turn off the main water valve to preventdamage caused by leaking water. ^ Attach the connecting pipe to theshut-off valve, according to theinstructions supplied by themanu...

Connecting the water supply When connecting the water pipe tothe solenoid valve of the appliance,follow the instructions supplied bythe manufacturer of the ice cubemaker installation kit. When bending the water pipe, be surenot to kink it, otherwise there is a risk ofleaks and water damage.Use bendi...

, Avoid the risk of electrical shock- Plug into a grounded 3-prongoutlet.- Do not move the ground plug.- Do not use an adapter.- Do not use an extension cord. Failure to follow these instructionscan result in death, fire, or electricalshock. Improper connection of theequipment grounding conductormay...

MasterCool control panel options for RemoteVision Status indicators Description of function Flashing ; ~ Module booting phase Flashing ; ‡ Not connected to network Flashing ; | Connection to network established, no IP addressassigned Solid ; # Connected to network Flashing ; < In Ad-Hoc Mode, not...