Miele APWM 052 - User Manual

Page 2 - CONTENTS

2 Revision 1.0 05/2022 B1051 CONTENTS SAFETY PRECAUTIONS ---------------------------------------------------------------------------------------------------------------------------------------------------- 3 INSTALLATION - MOUNTING --------------------------------------------------------------------...

Page 3 - SAFETY PRECAUTIONS; Important Safety Instructions

3 Revision 1.0 02/2021 M0000 SAFETY PRECAUTIONS Important Safety Instructions Please read the following precautions carefully before using this equipment. This unit contains high voltage components which, may expose you to the risk of electric shock. Do not open the enclosure without isolating the s...

Page 4 - INSTALLATION - MOUNTING; MAXIMUM

4 Revision 1.0 05/2022 B1051 INSTALLATION - MOUNTING 350 mm 13.8 in. 350 mm 13.8 in. 60 mm 2.4 in. 60 mm 2.4 in. MAXIMUM 2 Metres Fix the unit to a vertical wall using the screws provided.Ensure that the unit is level and positioned no more than 2 metres above the base of the product, which is to be...

Page 5 - INSTALLATION - WIRING 1; AFS

5 Revision 1.0 02/2021 M0000 INSTALLATION - WIRING 1 In most cases, the interface board or solenoids in the host machine will have a common (i.e their negative terminals are all linked by a common wire). The switches S1 & S2 can be left switched to common (up position), and the single(common) wi...

Page 6 - DO NOT ATTEMPT TO SWITCH THE SWITCHES WHEN THE POWER IS ON.; INSTALLATION - WIRING 2

6 Revision 1.0 05/2022 B1051 In some cases, the interface board or solenoids in the hose machine are not common. For example: The softener solenoid on some machines is not linked via a common wire to the other solenoids. If this is the case, the signal must be isolated from the common B rail on the ...

Page 7 - PROGRAMMING - CONTROLS; BLUE; PROGRAMMING - KEY TO INSTRUCTIONS; GREY; BOLD

7 Revision 1.0 02/2021 M0000 PROGRAMMING - CONTROLS Throughout the instructions: If a button or buttons are shown in BLUE then they must be pressed to progress to the next stage. (If two buttons are shown, they must be pressed together) PROGRAMMING - KEY TO INSTRUCTIONS If buttons are shown in GREY ...

Page 8 - PROGRAMMING - LANGUAGE SELECTION; TEST

8 Revision 1.0 05/2022 B1051 PROGRAMMING - LANGUAGE SELECTION French, German, Spanish, Dutch, Czech, Polish, American, Italian or Portuguese. From the default screen, press and hold the TEST key for 2 seconds. The access code screen will then be displayed. Enter the correct four-digit access code us...

Page 9 - FLOW DIAGRAM - INSTRUCTIONS

9 Revision 1.0 02/2021 M0000 FLOW DIAGRAM - INSTRUCTIONS ACCESSING MODES ENTER CODE TO CHANGE UNIT MODE ---- SELECT UNIT MODE STANDARD MODE SELECT UNIT MODE STANDARD MODE SELECT UNIT MODE LEVELS MODE 0000 L1 01 RELAY MODE Brightwell SETTINGS ENTER CODE TO EDIT SETTINGS ---- 01 STANDARD MODE Brightwe...

Page 11 - FORMULA SELECT; pressing enter, before beginning the wash cycle.; PROGRAM; FORMULA SELECT - INSTALLATION; REMOVE links LK3 & LK4

11 Revision 1.0 02/2021 M0000 A RAIL B RAIL COMMON COMMON ISOLATED B RAIL COMMON B RAIL L N RED BLACK YELLOW WHITE GREENBLUE FORMULA SELECT The BrightLogic laundry Formula Select module (optional) allows remote selection of up to 20 different wash programs, program names can be displayed by uploadin...

Page 12 - NOTES