Miele AWG 102 - User Manual

Warning and Safety instructions 6 Using at the same time as other heating appliances that depend on the airfrom the room  Danger of toxic fumes! Great care should be taken when using the external motor in thesame room or the same area of the house as another heatingappliance that depends on the air...

Warning and Safety instructions 8 Correct installation  Exhaust ducting must be of non-inflammable material. Suitable material is available from Miele specialist dealers or the Miele SparesDept.  The appliance must not be connected to a chimney or flue which is in use. Neither should it be connect...

Caring for the environment 9 Disposal of the packingmaterial The packaging is designed to protectthe appliance from damage duringtransportation. The packaging materialsused are selected from materials whichare environmentally friendly for disposaland should be recycled. Recycling the packaging reduc...

Installation 10 Before installation  Before installation, it is important to read the information given on thefollowing pages as well as the"Warning and Safety instructions" atthe beginning of this booklet. Installation recommendations – Make sure that the installation location is easily ac...

Connection for air extraction 20  Use smooth pipes or flexible ductingmade from approved non-flammablematerials for exhaust ducting.  To achieve the most efficient airextraction with the lowest noiselevels, please note the following: – The cross-section of the exhaust ducting must not be smaller t...

Connection for air extraction 21 Silencer To achieve even further reductions innoise levels, a special silencer (optionalaccessory) can be fitted in the ductingsystem. Extraction mode with anexternal motor To minimise noise from the motor in thekitchen, the silencer should bepositioned in front of t...

After Sales / Warranty 22 In the event of a fault which you cannotremedy yourself, please contact yourMiele dealer or the Miele ServiceDepartment. Contact details for Miele are given atthe end of this booklet. N.B. A call-outfee will be charged for service visitswhere the problem could have beenreso...

Electrical connection 23 The external motor is connected to thecooker hood by means of a specialcontrol cable and is operated by thecontrol elements on the cooker hood. The electrical system must comply withlocal and national safety regulations (BS7671 in the UK). For increased safety, it is recomme...

Technical data 24 AWG 102 Total connected load 200 W Voltage, frequency AC 230 V, 50 Hz Fuse rating 5 A Control cable length 0.75 m Connection cable length 5 m Weight 14.1 kg Operating temperature down to - 20 °C Fan throughput according to EN 61591* Level 1 320 m 3 /h Level 2 460 m 3 /h Level 3 580...