Metra 99-8214TB - Manual
Metra 99-8214TB – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; NOWLEDGE IS
- Page 3 – DASH DISASSEMBLY; Continue to Kit Preparation.
- Page 4 – KIT PREPARATION; Continue to Kit Assembly.; (SKIP KIT PREPARATION WHEN INSTALLING DDIN RADIO)
- Page 5 – KIT ASSEMBLY; DIN HEAD UNIT PROVISION; Continue to Final Assembly.
- Page 6 – ISO DIN HEAD UNIT PROVISION
- Page 7 – DOUBLE DIN HEAD UNIT PROVISION
- Page 8 – STACKED ISO DIN HEAD UNIT PROVISION
- Page 9 – Twist ends together; FINAL ASSEMBLY; When Black a wire is not present, ground radio to vehicle chassis.; METRA / EIA WIRING CODE
- Page 10 – NOTES
INSTALLATION INSTRUCTIONS FOR PART 99-8214
Phillips Screwdriver • Small Flat Blade Screwdriver • Socket Wrench
1-800-221-0932 www.metraonline.com
KIT FEATURES
© COPYRIGHT 2004-2010 METRA ELECTRONICS CORPORATION
• DIN Head Unit Provision With Pocket
• ISO DIN Head Unit Provision With Pocket
• Double DIN Head Unit Provision
• Stacked ISO DIN Head Unit Provision
• Painted And Textured To Match Factory Dash
• Available In Two Colors:
99-8214TB = BLACK, 99-8214TG = GRAY
• Both kits are factory “golf ball” style
textured.
• A) Radio Housing • B) Radio Housing Brackets
KIT COMPONENTS
A
B
C
D
APPLICATIONS
Toyota Tacoma 2005-2011
• C) Radio Housing Trim Panel • D) ISO Brackets
• E) ISO Trim Plate • F) (4) #6 x 3/8” Phillips Pan Head Screws
• G) (4) #8 X 3/8” Phillips Truss Head Screws • H) Double DIN Trim Plate • I) Clock/Hazard Switch Bracket
E
F
G
H
99-8214TB
99-8214TG
TOOLS REQUIRED:
I
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Harness:
• 70-1761 - Toyota harness 1987-up
• TYTO-01 - Toyota amp interface harness 2003-up
Antenna Adapter:
• Not required
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Kit Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3,4,5,6 Final Assembly . . . . . . ....
99-8214 1 Disconnect the negative battery terminal to prevent an accidentalshort circuit. 1 Unclip and remove A/C control panel. (Figure A) 2 TOYOTA TACOMA 2005-2011 Remove (4) 10 MM bolts securingradio. (Figure B) 3 Unclip and remove entire panelincluding hazard switch and clock. (Figure C) 4 Remov...
2 99-8214 TACOMA 2005-2011 KIT PREPARATION Clip the clock/hazard switch assembly into the 99-8214 RadioHousing Trim Panel. (Figure A,B) 2 A H M PASSENGER PASSENGER INSERT CLOCK/HAZARD SWITCH ASSEMBLY FROM REAR OF 99-8214 RADIO HOUSING TRIM PANEL H M PASSENGER PASSENGER B Continue to Kit Assembly. At...
