Metra 95-8208 - Manual
Metra 95-8208 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS
- Page 4 – DOUBLE DIN RADIO PROVISION
- Page 5 – STACKED ISO UNITS PROVISION
- Page 6 – FINAL ASSEMBLY; FINAL WIRING CONNECTIONS
- Page 7 – NOTES
INSTALLATION INSTRUCTIONS FOR PART 95-8208
APPLICATIONS
Toyota Sienna
2004-2010
KIT FEATURES
• Double DIN Radio Provision
• Stacked ISO Mount Units Provision
• A) Radio Housing • B) Double Din Trim Plate • C) Double DIN Brackets
KIT COMPONENTS
A
TOOLS REQUIRED:
Small Flat Blade Screwdriver/ Panel Removal Tool
• Socket Set
1-800-221-0932
© COPYRIGHT 2007-2010 METRA ELECTRONICS CORPORATION
www.metraonline.com
B
95-8208
C
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Wiring Harness:
• 70-1761 -Toyota harness 1987-up
• TYTO-01 - Toyota amp harness 2003-up
Antenna Adapter:
• Not required
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Dash Disassembly - Toyota Sienna 2004-2010 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Assembly - Double DIN Radio Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - Stacked ISO Mount Units Provision . . . . . . . . . . . . . . . . . . . . . . . . . . 3 F...
95-8208 KIT ASSEMBLY 2 B A C DOUBLE DIN RADIO PROVISION Slide the Double DIN radio into thebracket/housing assembly and securethe radio to the assembly using thescrews supplied with the radio. (Figure B) 2 Snap the Double DIN brackets to theinside edge of the radio housing. (Figure A) 1 Snap the Dou...
95-8208 KIT ASSEMBLY 3 B A C STACKED ISO UNITS PROVISION Slide the stacked ISO units into thebracket/housing assembly and securethe units to the assembly using thescrews supplied with the units. (Figure B) 2 Snap the Double DIN Trim plate intothe Radio Housing. (Figure C) 3 Continue to final assembl...
