Makita DF332DWME User Manual - Free PDF Download

Page 2 - SPECIFICATIONS; Symbols; Intended use

2 ENGLISH SPECIFICATIONS Model: DF332D DF032D Drilling capacities Steel 10 mm Wood 28 mm Fastening capacities Wood screw 5.1 mm x 63 mm Machine screw M6 No load speed High (2) 0 - 1,500 min -1 Low (1) 0 - 450 min -1 Overall length 154 mm 124 mm Rated voltage D.C. 10.8 V - 12 V max Battery cartridge ...

Page 3 - General power tool safety warnings; Save all warnings and instruc-

3 ENGLISH Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium 11.6.2015 Yasushi Fukaya Director Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium General power tool safety warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electri...

Page 4 - Cordless driver drill safety warnings; Important safety instructions for; SAVE THESE INSTRUCTIONS.

4 ENGLISH Battery tool use and care 1. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. 2. Use power tools only with specifically desig - nated battery packs. Use of an...

Page 5 - FUNCTIONAL; Installing or removing battery; Battery protection system

5 ENGLISH FUNCTIONAL DESCRIPTION CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge CAUTION: Always switch off the tool before installing or removing of the battery car...

Page 6 - Switch action; Reversing switch action

6 ENGLISH Switch action 1 ► 1. Switch trigger CAUTION: Before inserting the battery car- tridge into the tool, always check to see that the switch trigger actuates properly and returns to the "OFF" position when released. To start the tool, simply pull the switch trigger. Tool speed is incre...

Page 7 - Adjusting the fastening torque; ASSEMBLY; Installing or removing driver bit/

7 ENGLISH Position of speed change lever Speed Torque Applicable operation 1 Low High Heavy load- ing operation 2 High Low Light loading operation To change the speed, switch off the tool first. Select the "2" side for high speed or "1" for low speed but high torque. Be sure that the...

Page 8 - Installing hook

8 ENGLISH Turn the sleeve counterclockwise to open the chuck jaws. Place the driver bit/drill bit in the chuck as far as it will go. Turn the sleeve clockwise to tighten the chuck. To remove the driver bit/drill bit, turn the sleeve counterclockwise. Installing or removing driver bit/ socket bit For...

Page 9 - Installing driver bit holder; OPERATION; Screwdriving operation; Drilling in wood

9 ENGLISH Installing driver bit holder Optional accessory 1 2 ► 1. Driver bit holder 2. Driver bit Fit the driver bit holder into the protrusion at the tool foot on either right or left side and secure it with a screw. When not using the driver bit, keep it in the driver bit holders. Driver bits 45 ...

Page 10 - Using the tool as a hand screwdriver; Using holster; MAINTENANCE; OPTIONAL

10 ENGLISH Using the tool as a hand screwdriver Switch off the tool. Move the reversing switch lever to the neutral position. Turn the adjusting ring so that the arrow points to the marking. Turn the tool. NOTE: This use is convenient for checking the screwdriving. NOTE: Do not use the tool for work...