Makita 9564PC - User Manual
Makita 9564PC Angle Grinder – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SPECIFICATIONS; Symbols
- Page 3 – EC-DECLARATION OF CONFORMITY
- Page 4 – SPECIFIC SAFETY RULES
- Page 7 – Shaft lock
- Page 8 – Soft start feature; ASSEMBLY; Installing or removing wheel guard; For tool with locking screw type wheel guard
- Page 9 – OPERATION; Grinding and sanding operation; MAINTENANCE
- Page 10 – ACCESSORIES
1
ENGL
ISH
INSTRUCTION MANUAL
DOUBLE INSULATION
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Angle Grinder
9564PC
9564PCV
9565PC
9565PCV
9566PC
9566PCV
008369
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Other Manuals for Makita 9564PC
Summary
2 ENGLISH SPECIFICATIONS 115 mm M14 9564PC - 9564PCV - 125 mm M14 9565PC - 9565PCV - Depressed center wheel diameter Spindle thread 150 mm M14 - 9566PC - 9566PCV No load speed ( n o ) / Rated speed (n) 11,500 10,000 2,800 - 11,500 4,000 - 10,000 Overall length 307 mm 307 mm 307 mm 307 mm Net weight ...
3 ENH101-8 EC-DECLARATION OF CONFORMITY Model; 9564PC,9564PCV,9565PC,9565PCV,9566PC,9566PCV We declare under our sole responsibility that this product is in compliance with the following standards of standardized documents; EN60745, EN55014, EN61000 in accordance with Council Directives, 2004/108/EC...
4 rate for which it was designed. 18. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. 19. Disconnect the plug from the power source and/or the battery pack from the power tool before maki...
