Makita GA5020Y - User Manual
Makita GA5020Y Angle Grinder – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SPECIFICATIONS; Symbols
- Page 3 – SPECIFIC SAFETY RULES
- Page 6 – SAVE THESE INSTRUCTIONS.; Shaft lock
- Page 7 – Soft start feature; ASSEMBLY
- Page 8 – Installing or removing wheel guard
- Page 9 – OPERATION; Grinding and sanding operation; MAINTENANCE
- Page 10 – Replacing carbon brushes; ACCESSORIES
- Page 12 – Makita Corporation
1
ENGLISH (
O
rigina
l in
st
ruct
ions)
INSTRUCTION MANUAL
DOUBLE INSULATION
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Angle Grinder
GA5020
GA5020C
GA5021
GA5021C
GA6020
GA6020C
GA6021
GA6021C
008074
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 ENGLISH SPECIFICATIONS Model GA5020 GA5021 GA5020C / GA5021C GA6020 GA6021 GA6020C / GA6021C Depressed center wheel diameter 125 mm 125 mm 125 mm 150 mm 150 mm 150 mm Spindle thread M14 M14 M14 M14 M14 M14 No load speed (n o ) / Rated speed (n) 11,000 min -1 11,000 min -1 10,000 min -1 10,000 min ...
3 7. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. 8. When operating a power tool outdoors, use an extension cord suitable for o...
6 20. Before using the tool on an actual workpiece, let it run for a while. Watch for vibration or wobbling that could indicate poor installation or a poorly balanced wheel. 21. Use the specified surface of the wheel to perform the grinding. 22. Watch out for flying sparks. Hold the tool so that spa...
