Makita GA4030K - User Manual

Makita GA4030K

Makita GA4030K Angle Grinder – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
33 Page 33
34 Page 34
35 Page 35
36 Page 36
Page: / 36

Table of Contents:

  • Page 2 – ENGLISH; SPECIFICATIONS; GENERAL SAFETY RULES; Work area safety
  • Page 3 – SPECIFIC SAFETY RULES
  • Page 6 – SAVE THESE INSTRUCTIONS.; Shaft lock
  • Page 7 – ASSEMBLY; Installing or removing wheel guard
  • Page 8 – OPERATION; Grinding and sanding operation
  • Page 11 – MAKITA LIMITED ONE YEAR WARRANTY
  • Page 12 – FRANÇAIS; SPÉCIFICATIONS; Sécurité de la zone de travail
  • Page 17 – Symboles
  • Page 18 – Interrupteur; ASSEMBLAGE; Installation de la poignée latérale (poignée)
  • Page 19 – UTILISATION; Opérations de meulage et de ponçage
  • Page 20 – ENTRETIEN
  • Page 21 – ACCESSOIRES
  • Page 23 – GARANTIE LIMITÉE D’UN AN MAKITA
  • Page 24 – ESPAÑOL; ESPECIFICACIONES; ¡ADVERTENCIA! Lea todas las instrucciones.
  • Page 29 – No utilice agua o lubricante para rectificar; Símbolos
  • Page 30 – ENSAMBLE; Instalación de la empuñadura lateral (mango)
  • Page 32 – OPERACIÓN; Operación de amolado y lijado
  • Page 36 – Makita Corporation
Loading the manual

1

INSTRUCTION MANUAL

MANUEL D'INSTRUCTION

MANUAL DE INSTRUCCIONES

DOUBLE INSULATION
DOUBLE ISOLATION
DOBLE AISLAMIENTO

WARNING:

For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

AVERTISSEMENT:

Pour votre propre sécurité, prière de lire attentivement avant l'utilisation.
GARDER CES INSTRUCTIONS POUR RÉFÉRENCE ULTÉRIEURE.

ADVERTENCIA:

Para su seguridad personal, LEA DETENIDAMENTE este manual antes de usar la
herramienta.
GUARDE ESTAS INSTRUCCIONES PARA FUTURA REFERENCIA.

Angle Grinder

Meuleuse d'Angle

Esmeriladora de Disco

GA4030
GA4530
GA5030

009421

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - ENGLISH; SPECIFICATIONS; GENERAL SAFETY RULES; Work area safety

2 ENGLISH SPECIFICATIONS Model GA4030 GA4530 GA5030 Wheel diameter 100mm (4") 115mm (4-1/2") 125mm (5") No load speed (RPM) 11,000/min 11,000/min 11,000/min Overall length 266 mm (10-1/2") 266 mm (10-1/2") 266 mm (10-1/2") Net weight 1.4 kg (3.1 lbs) 1.4 kg (3.1 lbs) 1.4 kg (...

Page 3 - SPECIFIC SAFETY RULES

3 Power tool use and care 16. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. 17. Do not use the power tool if the switch does not turn it on and off. Any power tool that cann...

Page 6 - SAVE THESE INSTRUCTIONS.; Shaft lock

6 that sparks fly away from you and other persons or flammable materials. 29. Do not leave the tool running. Operate the tool only when hand-held. 30. Do not touch the workpiece immediately after operation; it may be extremely hot and could burn your skin. 31. Always be sure that the tool is switche...

Other Makita Angle Grinders Models