Page 2 - Table of Contents; TABLE OF CONTENTS
Table of Contents TABLE OF CONTENTS 2.1 Product Overview - Outside2.2 Product Overview - Inside2.3 Understanding Your New Lock2.4 Reset Button2.5 Rebooting Your Lock2.6 Low Battery2.7 Changing The Battery Section 1 - Product Highlights Section 2 - Product Overview Section 3 - Using Your Smart Lock 3...
Page 6 - Understanding Your New Lock; Access Codes
2.3 Understanding Your New Lock SECTION 2.3 After the installation of your new Lockly ® , understanding some key functions of operating your smart lock is important. The following guides will walk you through resetting a lock, adding Access Codes , deleting Access Codes ,and also how to configure yo...
Page 8 - Rebooting Your Lock; NOTICE; Reboot Lockly; Reboot Button
2.6 Rebooting Your Lock SECTION 2.6 NOTICE Reboot Lockly ® in case of dead battery or malfunction. No settings will be changed and all Access Codes will still be stored within Lockly ® . Press and release the reboot button when you want to reboot the lock. Your Lockly ® will beep once after reboot. ...
Page 9 - Condition; V Battery
2.7 Low Battery SECTION 2.7 When the battery is in seriously low condition, Lockly ® will make continuous beeping sounds in addition to the flashing low battery icon on the touch screen. You should replace batteries immediately to avoid your smart lock from shutting down. When your smart lock low-ba...
Page 10 - Changing The Battery; regularly; Screw
2.8 Changing The Battery SECTION 2.8 Under normal use, the Lockly ® battery will last up to a year. Please check battery levels regularly and change your batteries when the low battery notification is issued. For best practice, always use new batteries by a major brand. Open the battery compartment ...
Page 11 - Configuring Access; The Default Access Code is; Access Code
3.1 Configuring Access SECTION 3.1 The Default Access Code is NOTICE 1 2 3 4 5 6 Your new Lockly ® Access Code can be any combination of 6 to 8 digits. Once a new Access Code is entered, the Default Access Code of 123456 would be deleted. A maximum of 16 sets of Access Codes can be stored for use at...
Page 12 - Entering Programming Mode; Mode
3.2 Entering Programming Mode SECTION 3.2 Program Button Add Access Code Mode Number Delete Access Code View Access Code To enter Programming Mode , remove the battery compartment cover on the interior side of the Secure to expose the Reset and Program buttons (See page 8). Simply press the Program ...
Page 13 - Adding an Access Code
3.3 Adding an Access Code SECTION 3.3 While in Programming Mode , select “1AD” to add an Access Code. If you are not in Programming Mode , please see Section 3.2 to enter Programming Mode . After pressing “1AD” to add an Access Code . Enter your new 6 - 8 digit Access Code and press when you are fin...
Page 15 - Deleting an Access Code
3.4 Deleting an Access Code SECTION 3.4 While in Programming Mode , select “2DE” to delete an Access Code . If you are not in Programming Mode , please see Section 3.2 to enter Programming Mode . After pressing “2DE” to delete an Access Code . OK Button Example Only Active Access Codes will then be ...
Page 16 - There are two incidents where your; NOTE; Only one Active Access Code
3.4 Deleting an Access Code (Continued) SECTION 3.4 Once you have selected the Access Code you want to delete, Lockly ® will ask you to confirm deletion by showing you the Access Code you are deleting, in this example, 1 3 5 7 9 0. Press to delete , or to cancel . There are two incidents where your ...
Page 17 - Checking the Access Codes
3.5 Checking the Access Codes SECTION 3.5 While in Programming Mode , select “3CH” to check registered Access Codes . If you are not in Programming Mode , please see Section 3.2 to enter Programming Mode . Active Access Codes will then be displayed on the screen in sequence from left to right, top t...
Page 18 - Adding Secure Link
3.6 Adding Secure Link SECTION 3.6 Lockly ® Secure Link adds live status monitoring and voice control capabilities to your Lockly ® Smart Lock. Secure Link can be purchased and added anytime. To set up the Lockly ® Model 7S smart lock with Secure Link Wi-Fi Hub and Door Sensors, launch the Lockly ® ...
Page 19 - PIN Genie
4.1 Locking/Unlocking with Access Codes Lockly ® Smart Lock can be unlocked using multiple ways - via your stored Access Code , smartphone with Bluetooth , the physical key supplied with your lock, or voice (Secure Pro only or Secure Plus with Secure Link Wi-Fi Hub installed) OK Button Three consecu...
Page 20 - with App; You must have the Lockly
4.2 Locking/Unlocking Lockly ® with App 18 SECTION 4.3 You must have the Lockly ® iOS or Android app installed in order to lock and unlock with smartphone and connect with voice assistants like Alexa or Google Assistant. Please download the app by visiting the link below or search “Lockly” from the ...
Page 21 - Exterior View; clockwise or counter clockwise to lock or unlock the door.
4.3 Locking/Unlocking with Physical Key Exterior View To unlock your lock using the physical key (included), insert your key and turn clockwise or counter clockwise to lock or unlock the door. 19 SECTION 4.3
Page 22 - Locking and Unlocking with Voice Assistants
20 SECTION 4.4 Once your Lockly ® Model 7S and Secure Link Wi-Fi Hub has been installed and configured correctly, make sure you enable the Lockly ® Action for Google Assistant or the Amazon Alexa Skill before you can configure your voice to perform voice commands. You can ask your questions such as ...
Page 24 - Disabling Safe Mode
Option 1 - Entering Correct Access Code Activate the keypad by pressing and holding for 3 seconds. Enter the correct Access Code twice (2) when the keypad is available, pressing after every time the Access Code is entered. 4.5 Disabling Safe Mode Option 2 - Lockly ® Bluetooth App Use the app that is...
Page 25 - Offline Access Code
The Offline Access Code ™ (OAC) is a unique feature of our smart lock. It allows you to grant access to guests remotely without guests needing to download the app. To use the OAC feature, make sure you download the Lockly ® app for iOS or Android first, and sync your smart lock to your mobile device...
Page 26 - Offline Access Code
Sub-Admin Access can be created to grant access for others to be able to control your lock and grant access to others via Bluetooth when within range of your Lockly ® smart lock. The sub-admin permission can be setup through the Lockly ® App then Add A New User. You can select the Validity Period an...
Page 30 - Safety Precautions; Please read all instructions carefully. Remind all Lockly
9.1 Safety Precautions SECTION 9.1 Please read all instructions carefully. Remind all Lockly ® users of the safety precautions. Read the following instructions for your own safety Do not attempt to disassemble the smart lock by yourself. It can cause product damage, void warranty, and cause injuries...
Page 31 - Certified
Certified FCC Warning ： This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ...
Page 32 - This product can expose you to chemicals including Lead, which is
(1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement écon...
Page 33 - MODEL 7S
UM 7S 202005 28 We’re here to help! [email protected] https://lockly.com/help MODEL 7S R
Page 34 - For the latest version of this manual, please visit the link below:
About Lockly ® Secure, Secure Plus, Secure Pro and Secure Lux are keyless smart locks equipped with the patented PIN Genie ® , which is a peep proof and hidden camera proof algorithm software. Lockly ® makes your life easier and safer. For the latest version of this manual, please visit the link bel...
