Lockly PGD 728W MB - User Manual

2.6 Rebooting Your Lock SECTION 2.6 NOTICE Reboot Lockly in case of dead battery or malfunction. No settings will be changed and all Access Codes will still be stored within Lockly. Press and release the reboot button when you want to reboot the lock. Your Lockly will beep once after reboot. Only re...

2.7 Low Battery SECTION 2.7 When the battery is in seriously low condition, Lockly will make continuous beeping sounds in addition to the flashing low battery icon on the touch screen. You should replace batteries immediately to avoid your smart lock from shutting down. When your smart lock low-batt...

2.8 Changing The Battery SECTION 2.8 Under normal use, the Lockly battery will last up to a year. Please check battery levels regularly and change your batteries when the low battery notification is issued. For best practice, always use new batteries by a major brand. Open the battery compartment co...

3.1 Configuring Access SECTION 3.1 The Default Access Code is NOTICE 1 2 3 4 5 6 9 How to Use the Keypad There are a total of five (5) buttons on the keypad as shown in the example image to the left. The numbers in each button may differ than what is shown on your device than what is displayed here....

3.2 Entering Programming Mode SECTION 3.2 Add Access Code Mode Number Delete Access Code View Access Code To enter Programming Mode , remove the battery compartment cover on the interior side of the Secure to expose the Reset and Program buttons (See page 8). Simply press the Program button to enter...

3.3 Adding an Access Code SECTION 3.3 While in Programming Mode , select “1AD” to add an Access Code. If you are not in Programming Mode , please see Section 3.2 to enter Programming Mode . After pressing “1AD” press “Pd” to add an Access Code . 11 Enter your new 6 - 8 digit Access Code and press wh...

3.4 Deleting an Access Code SECTION 3.4 While in Programming Mode , select “2DE” to delete an Access Code . If you are not in Programming Mode , please see Section 3.2 to enter Programming Mode . After pressing “2DE” press “Pd” to delete an Access Code . OK Button Example Only Active Access Codes wi...

3.4 Deleting an Access Code (Continued) SECTION 3.4 Once you have selected the Access Code you want to delete, Lockly will ask you to confirm deletion by showing you the Access Code you are deleting, in this example, 1 3 5 7 9 0. Press to delete , or to cancel . There are two incidents where your Ac...

3.5 Checking the Access Codes SECTION 3.5 While in Programming Mode , select “3CH” to check registered Access Codes . If you are not in Programming Mode , please see Section 3.2 to enter Programming Mode . Active Access Codes will then be displayed on the screen in sequence from left to right, top t...

3.6 Adding a Fingerprint SECTION 3.6 In this section, you will learn how to register a fingerprint to your new smart lock. We are using an advanced biometric sensor, providing the most secure fingerprint authentication. For security reasons, Lockly will only accept fingerprint patterns that consist ...

While in Programming Mode* , select “1AD” to add an Access Code . If you are not in Programming Mode , please see Section 3.2 to enter Program- ming Mode . After pressing “1AD” press “FP” to register a Fingerprint. Upon pressing “FP” , you will enter Fingerprint Registration Mode and you will see a ...

Top View Side View OK X X OK X X SECTION 3.7 Correct Incorrect 19 3.7 Fingerprint Scanning Directions The fingerprint sensor equipped in your smart lock is loaded with powerful fingerprint algorithms to extract quality features from fingers, even in poor conditions. Placing your finger on the sensor...

3.8 Fingerprint Scanning Tips & Troubleshoot SECTION 3.8 Tips for Fingerprint Enrollment and Recognition • Place your finger to completely cover the sensor with maximum contact surface. • Position the center of your finger (core) to the center of the sensor. • Hold your finger still for more tha...

3.10 Adding Secure Link SECTION 3.10 Lockly Secure Link¹ adds live status monitoring and voice control capabilities to your Lockly Smart Lock. If you purchased a Secure Pro model, the Secure Link is included in your package. For all other Lockly products, the Secure Link can be purchased and added a...

4.1 Unlocking using Access Codes Lockly Smart Lock can be unlocked using multiple ways - via your stored Access Code , registered fingerprint , smartphone with Bluetooth , the physical key supplied with your lock, or voice (Secure Pro only or Secure Plus with Secure Link Wi-Fi Hub installed) OK Butt...

24 SECTION 4.2 4.2 Unlocking using Fingerprints Place a registered finger to the fingerprint scanner located on the exterior side of the lock to the right. To register a fingerprint , please see Section 3.6. If your fingerprint is registered and acknowledged, you will hear a “beep” sound and a Green...

4.3 Locking/Unlocking using App 25 SECTION 4.3 You must have the Lockly iOS or Android ™ app installed in order to lock and unlock with smartphone and connect with your Amazon Alexa or Google Assistant-enabled devices. Please download the app by visiting the link below or search “Lockly” from the co...

4.4 Locking/Unlocking with Physical Key Exterior View To unlock your lock using the physical key (included) , open the key cover by sliding the cover on either left or right direction to reveal the keyhole . Insert key and turn clockwise (right swing door) or counterclockwise (left swing door) to un...

27 SECTION 4.6 Once your Lockly Smart Lock and Secure Link ¹ Wi-Fi Hub has been installed and configured correctly, make sure you enable the Lockly Action on Google or the Amazon Alexa Skill before you can configure your voice to perform voice commands. You can ask your questions such as door status...

Option 1 - Entering Correct Access Code Activate the keypad by pressing and holding for 3 seconds. Enter the correct Access Code twice (2) when the keypad is available, pressing after every time the Access Code is entered. Option 2 - Lockly Bluetooth App Use the app that is synced to your Lockly to ...

SECTION 4.8 30 Like other digital electronic products water can trigger to activate the touchscreen and fingerprint sensor which may cause the batteries to drain. To protect the lock and extend battery life, you can setup your Lockly to enter Rain Mode to shut off keypad and fingerprint reader whene...

The Offline Access Code ™ (OAC) is a unique feature of our smart lock. It allows you to grant access to guests remotely without guests needing to download the app. To use the OAC feature, make sure you download the Lockly app for iOS or Androi ™ first, and sync your smart lock to your mobile device....

9.1 Safety Precautions SECTION 9.1 Please read all instructions carefully. Remind all Lockly users of the safety precautions. Read the following instructions for your own safety Do not attempt to disassemble the smart lock by yourself. It can cause product damage, void warranty, and cause injuries. ...

UMPGD72820230414 We’re here to help! [email protected] https://Lockly.com/help SECURE To ensure you have access to the most updated and newly added features of your Lockly smart lock, please subscribe to our newsletters, follow us on our social media channels, update your Lockly app when prompted, o...