Lexmark 450 - Manual

USB flash drive • An adapter may be necessary if your USB flash drive does not fit directly intothe PictBridge port. • Consult the Lexmark Web site at www.lexmark.com for late-breaking information about supported USB flash drives. PictBridge enabled digital cameras or camera phones • Make sure the P...

Understanding the printer This compact printer is a standalone device that can be used to: • View • Print • Save photos. Printer parts Use the To 1 Paper support Load paper. 2 Access cover Access the print cartridge. 3 Memory card slots Insert memory cards. 4 Paper exit tray Stack paper as it exits....

Use the To 1 Power connector Connect the printer to a powersource. 2 Video output port Connect a TV to the printer using asuper video cable. 3 Bluetooth port Connect a Bluetooth adapter (only) tothe printer. Using the control panel If you want to print a photo while using the control panel, a photo ...

Navigating the display menus 1 Insert a memory card, CD, or USB flash drive. 2 Press or to choose one of the available options. Use To 1 Setup Select printer settings and options,and perform maintenance tasks 2 Print All / Index Print all photos or an index page. 3 View & Print Select, edit, and...

Loading paper into the printer Using supported paper types • Card stock—postcards, index cards, greeting cards, Hagaki cards • Photo paper—glossy, Lexmark Everyday Photo, Lexmark Premium Photo Using supported paper types • 4 x 6 in • A6 • 10 x 15 cm • L • Hagaki Before loading paper Make sure: • The...

Selecting the paper size 1 From the main screen, press or until Setup appears. 2 Press . 3 Press or until Paper Size appears. 4 Press . 5 Press or until the paper size you want appears. 6 Press . Selecting the paper type 1 From the main screen, press or until Setup appears. 2 Press . 3 Press or unti...

Getting started printing photos This chapter contains basic information about printing photos using the printeroperator panel. For information about printing from specific photo storage devices,see “Using photo storage devices” on page 27. Previewing photos 1 Insert a memory card, CD, or USB flash d...

Printing all photos from a photo storage device 1 Insert a memory card, CD, or USB flash drive. 2 Press until Print All / Index appears. 3 Press . 4 Press to print each photo on its own page. 5 Press to begin printing. Printing multiple copies of a photo You can print from one to ten copies of each ...

Selecting and editing photos You can choose from any of the available editing options, such as zooming in on aparticular area in the photo, adjusting the brightness, removing red eye, or other coloreffects to edit the photos before printing or saving. All photos selected remainselected until you des...

7 Press . Crop & Zoom appears. 8 Press . 9 Press repeatedly to select one of the following: • Rotate to change the photo from portrait to landscape • Zoom-In/Zoom-Out to enlarge or reduce part of the photo • Left/Right to horizontally change part of the photo • Up/Down to vertically change part ...

5 Press . 6 Press . 7 Press or until Red Eye appears. 8 Press . 9 Press or until On appears. 10 Press . 11 Press to return to the previous display. 12 Press to print your photos. Using Color Effects The Color Effects feature lets you print in tones of Sepia, Antique Brown, AntiqueGray, or black and ...

Viewing a slide show Viewing a photo slide show You can view a slide show of the photos saved on a photo storage device. 1 Insert a memory card, CD, or USB flash drive; connect a PictBridge-enableddigital camera; or make sure a Bluetooth adapter is attached. 2 Press repeatedly until Slide Show appea...

Using photo storage devices You can use several kinds of photo storage devices to work with photos. • See the section on the device you want to use for instructions on its use. • To select and print photos from a photo storage device, see “Selecting andprinting photos” on page 17. Note: The printer ...

Inserting a USB flash drive 1 Insert the USB flash drive into the PictBridge port on the front of the printer. Notes: • An adapter may be necessary if your USB flash drive does not fit directlyinto the port. • The printer reads only one photo storage device at a time. 2 Wait for the light on the pri...

6 To copy all photos, press . To copy selected photos, press , and then select all the photos you want to copy by pressing . 7 Press . Ready to Copy? appears. 8 Press . The photos are copied to the USB flash drive. 9 Press to select Finished . Using the CD drive You can print photos from a CD, save ...

Using a PictBridge-enabled digital camera to controlprinting photos Connect a PictBridge-enabled digital camera to the printer, and use the buttons onthe camera to operate the printer. 1 Insert one end of the USB cable into the camera. Note: Use only the USB cable that came with the digital camera. ...

Maintaining the printer Maintenance features are available to keep the printer functioning smoothly. Theseinclude: • Ink Level, for more information, see “Checking the ink level” on page 36. • Align Cartridge, for more information, see “Aligning the print cartridge” onpage 39. • Clean Cartridge, for...

4 Using another clean section of the cloth, gently hold the cloth against thecontacts for about three seconds, and then wipe in the direction shown. 5 With another clean section of the cloth, repeat step 3 and step 4. 6 Let the nozzles and contacts dry completely. 7 Reinsert the print cartridge. 8 C...

If you believe you purchased a genuine Lexmark print cartridge, but a non-Lexmarkprint cartridge message appears: • Contact us at our Web site: www.lexmark.com/recycle , or • Call the Customer Support Center for your country or region. Lexmark’s warranty does not cover damage caused by non-Lexmark p...

Troubleshooting General troubleshooting • “Power button is not lit” on page 43 • “Incorrect language appears on the display” on page 44 • “Page does not print or printer does not respond” on page 44 • “Poor photo quality” on page 45 • “Poor quality at the edges of the page” on page 46 • “Paper jam” ...

Make sure a cartridge is in the printer. Remove and then load paper. Check the ink level, and install a new print cartridge if necessary. 1 Remove the print cartridge. For more information, see “Removing a used printcartridge” on page 37. 2 Make sure the sticker and tape have been removed. 3 Reinser...

Try loading one sheet at a time. Photo storage device troubleshooting • “Memory card cannot be inserted” on page 47 • “Nothing happens when a memory card is inserted” on page 47 • “Error messages on display” on page 47 • “PictBridge-enabled device not recognized” on page 47 • “Cannot print from Pict...

Cannot print from PictBridge-enabled devices Enable PictBridge printing on the device by selecting the correct USB mode. Formore information, see the documentation that came with the device. 1 Disconnect the device. 2 Connect a PictBridge-enabled device to the PictBridge port. See thedocumentation t...

Notices Electronic emission notices Federal Communications Commission (FCC) complianceinformation statement The Lexmark TM P450, type 4350 has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation issubject to the following two ...

Index A access cover 9adjusting print area 21Align Cartridge feature 39aligning print cartridge from the control panel 39 all photos printing 19 Antique Brown 24Antique Gray 24 B B/W (black and white) 24black and white printing 24 Bluetooth 32 Mode 32UAA 32 brightness, adjusting 23buttons 11 C camer...