Leica 769459 - Manual

4 Start-up Leica DISTO™ D5 LCA782204a en EN F E P Laser Class 2 products: Do not stare into the laser beam or direct it towards other people unnecessarily. Eye protection is normally afforded by aversion responses including the blink reflex.  WARNING: Looking directly into the beam with optical aid...

6 Menu functions Leica DISTO™ D5 LCA782204a en EN F E P Display in "digital pointfinder" mode Digital pointfinder (4x zoom) The device has an integral digital pointfinder, which shows the target directly on the display. The displayed crosshairs allow precise measu-rements to be made even tho...

EN F E P 7 Leica DISTO™ D5 LCA782204a en Menu functions General description Press and hold the key to enter the Setup menu. By pressing the or keys, navigate through the main menu items in the menu. Press the key briefly to enter the submenu of the selected main menu item. By pressing the or keys yo...

8 Menu functions Leica DISTO™ D5 LCA782204a en EN F E P ) We recommend that measurements are initiated using the key when using the device on a tripod in order to prevent loss of sharp-ness. ) The settings are reset when the device is switched off. Beep ( ) You can switch the beep on or off. Offset ...

EN F E P 9 Leica DISTO™ D5 LCA782204a en Operation Operation Switching on and off Switches on the instrument and laser. The display shows the battery symbol until the next button is pressed.Pressing this button for longer switches the instrument off.The instrument switches off automatically after si...

10 Functions Leica DISTO™ D5 LCA782204a en EN F E P Functions Overview of the program icons Addition / subtraction Distance measuring. The next measurement is added to the previous one. The next measurement is subtracted from the previous one. This process can be repeated as required. Press this but...

EN F E P 11 Leica DISTO™ D5 LCA782204a en Functions Press and hold the button to display additional room information such as ceiling/floor area , surface area of the walls , circumfe- rence . Trapezoid measurement 1 See drawing { J } Press the key once. The symbol is displayed. Press the key and tak...

12 Functions Leica DISTO™ D5 LCA782204a en EN F E P Triangular area The area of a triangle can be calculated by the measurement of three sides. See drawing { N }. Press the key three times - the triangle symbol appears in the display. Press the key and measure the first side of the triangle . Press ...

14 Appendix Leica DISTO™ D5 LCA782204a en EN F E P Storage of constants / historical storage Storage of a constant You can store and recall a frequently used value e.g. height of a room. Measure the desired distance, press and hold the button until the device beeps to confirm storage. Recalling the ...

EN F E P 15 Leica DISTO™ D5 LCA782204a en Appendix Technical data * maximum deviation occurs under unfavourable conditions such as bright sunlight or when measuring to poorly reflecting or very rough surfaces. Measuring accuracy may deteriorate by approx. ± 0.1 mm/m for distances above 30 m. In long...

16 Appendix Leica DISTO™ D5 LCA782204a en EN F E P Measuring conditions Measuring range The range is limited to 200 m. At night or dusk and if the target is in shadow the measuring range without target plate is increased. Use a target plate to increase the measurement range during daylight or if the...