La Crosse Technology WS-7159U - Manual

Page 2 - TABLE OF CONTENTS; Topic Page; Program Mode; Features

2 TABLE OF CONTENTS Topic Page Inventory of Contents/Additional Equipment 3 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery installation 5 Program Mode Program Sequence and Default Settings 6 Function Keys 6 Setting the LCD Contrast 7 Setting the Time Zone 7-8 Daylight Saving Time Se...

Page 3 - INVENTORY OF CONTENTS; Instruction manual and warranty card.; Figure 1; Figure 2

3 INVENTORY OF CONTENTS 1. The indoor weather station (Figure 1). 2. One remote temperature sensor with mounting bracket (Figure 2). 3. Three each, ½” Philips screws. 4. One strip double-sided adhesive tape. 5. Instruction manual and warranty card. ADDITIONAL EQUIPMENT (not included) 1. Three fresh ...

Page 6 - SET

6 time-date readings. If you don’t leave the program mode during the programming of sections IV through XI, you can advance to step 4 of the next program setting. If you do leave the program setting (or want to program a specific setting) follow each instructional step to program that setting. I. PR...

Page 7 - TIME ZONE SETTING

7 Note: There are 8 LCD contrast levels to choose from—“Lcd 0” is the lightest, and “Lcd 7” is the darkest. 3. Press and release the IN button to select the level you desire. 4. Press and release the SET button to confirm and advance to the Time Zone setting. IV. TIME ZONE SETTING 1. Press and hold ...

Page 9 - TIME SETTING

9 VII. 12 OR 24 HOUR TIME SETTING 1. Press and hold the SET button for 5 seconds. 2. “LCD” will show in the time LCD and the number setting will flash. 3. Press and release the SET button four times. 4. “12h” or “24h” will flash in the time LCD. 5. Press and release the IN button to select 12 or 24-...

Page 13 - ICONS; Sunny; B. WEATHER TENDENCY ARROWS

13 another floor). In areas where the weather is not largely affected by the change of air pressure, the sensitivity setting should be set to 1. A. WEATHER ICONS There are 3 possible weather icons that will be displayed in the FORECAST LCD: Sunny —indicates that the weather is expected to improve (n...

Page 14 - LEVEL INDICATOR; F and; III. OUTDOOR TEMPERATURE; Adding Remote Temperature; IV. MINIMUM AND MAXIMUM TEMPERATURE RECORDS; the

14 is expected to become worse or remain poor. No arrow means the pressure is stable. II. INDOOR TEMPERATURE, HUMIDITY, AND COMFORT LEVEL INDICATOR The current indoor temperature (viewed on the left) and relative humidity (viewed on the right) are displayed in the INDOOR LCD. The comfort level indic...

Page 16 - CH

16 V. ADDING REMOTE TEMPERATURE SENSORS (OPTIONAL) The WS-7159U is able to receive signals from 3 different remote temperature sensors. The remote temperature sensor model(s) that you choose will come with their own set of instructions—follow these instructions for a complete guide to setting up. Fo...

Page 17 - I. THE REMOTE TEMPERATURE SENSOR

17 2. To view the Minimum/Maximum temperature: first select which remote temperature sensor to read data from (indicated by the “boxed” number), then press the OUT button. Pressing this button once will display the minimum temperature, and the date and time the data was recorded. Pressing this butto...

Page 18 - B. MOUNTING WITH ADHESIVE TAPE; The indoor weather station can be mounted in two ways:; A. USING THE TABLE STAND; stand from the rear and rotate forward.

18 2) Place the mounting bracket over the desired location. 3) Through the three screw holes of the bracket, mark the mounting surface with a pencil. 4) Screw mounting bracket onto the mounting surface. Ensure that the screws are flush with the bracket. 5) Insert the remote temperature sensor into t...

La Crosse Technology WS-7159U - Manual

Table of Contents:

Summary

Other La Crosse Technology Models