La Crosse Technology BC-9009U - Manuals

16 fourth rechargeable batteries can be only set to charging at a maximum current of 700 mA. Therefore, the user is advised to place the battery with the highest expected charging current in Compartment 1 first. To release the restriction of setting charging current, user must take out all four rech...

20 Note:  By pressing the MODE key within 8 seconds after inserting the rechargeable batteries, the Refresh mode can be selected. (The mode key shall first be pressed and held for about 1 second to activate the mode change. The subsequent pressing of the mode key will toggle between the “Charge”, “...

28 Table 7. Various displays in Test Mode Stage in Test mode Various displays (toggled by pressing DISPLAY key) Voltage (V) Current (mA) *Time (hh:mm) Capacity (mAh/ Ah) During charging Instantaneous Battery voltage Charging current Charging time elapsed “--- mAh” During discharging Discharging curr...

32 for repair by a qualified engineer. Opening and tampering with the units may invalidate its guarantee.  Do not expose the unit to extreme and sudden temperature changes, this may lead to damage to the electronic parts in the unit. SPECIFICATIONS: Input voltage for AC/DC adapter : 100-240 VAC but...

36 Fax: 608.796.1020 e-mail: [email protected] (warranty work) [email protected] (information on other products) web: www.lacrossetechnology.com Question? Instructions? Please visit: www.lacrossetechnology.com/9009 37 Quick Start for charging battery Place battery in charger,...