La Crosse Technology WS-7078UF - Manual
La Crosse Technology WS-7078UF – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; Topic Page; Program Mode; Features
- Page 3 – Instruction manual and warranty card.; Figure 1; Figure 2
- Page 5 – remote thermo/hygro sensor; first then into
- Page 6 – Remote Thermo/hygro Sensor; Press the arrow and slide the battery cover off.; Indoor Weather Station; Replace the battery cover.
- Page 7 – PROGRAM MODE; shield on the face of the unit. To access
- Page 14 – B. Weather Tendency Arrows
- Page 15 – III. Outdoor Temperature and Humidity; Adding Remote Thermo/hygro Sensors; IV. Minimum and Maximum Temperature Records; Waiting 20 seconds during either the minimum or the
- Page 17 – B. Snoozing and Stopping the Alarm
- Page 19 – “CH”
- Page 20 – Remove the mounting bracket/receptor from the packaging.
- Page 21 – Mounting With Adhesive Tape; Fit the mounting post into the receptor of the mounting bracket.; The Indoor Weather Station; The indoor weather station can be mounted in two ways:; Using the Table Stand
- Page 23 – Do not submerge in water.
- Page 25 – WARRANTY INFORMATION
- Page 26 – La Crosse Technology
WS-7078UF
Wireless 433 MHz
Radio-controlled Weather Station
Instruction Manual
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 TABLE OF CONTENTS Topic Page Inventory of Contents/Additional Equipment 3 About WWVB 4 Quick Set-Up Guide 5 Detailed Set-Up Guide Battery Installation 6 Program Mode Function Keys 7 12/24 hour Time Setting 8 Time Zone Setting 8-9 Daylight Saving Time Setting 9 Time Setting (WWVB & Manual) 10-1...
3 INVENTORY OF CONTENTS 1. The indoor weather station (Figure 1). 2. One TX4U remote thermo/hygro sensor with mounting bracket (Figure 2). 3. Three each, ½” Philips screws. 4. One strip double-sided adhesive tape. 5. Instruction manual and warranty card. ADDITIONAL EQUIPMENT (not included) 1. Four, ...
5 QUICK SET-UP GUIDE Hint: Use good quality Alkaline Batteries and avoid rechargeable batteries. 1. Have the indoor weather station and remote thermo/hygro sensor 3 to 5 apart. 2. Batteries should be out of both units for 10 minutes. 3. Place the batteries into the remote thermo/hygro sensor first t...
