La Crosse Technology WT-5720 - Manuals

Page 2 - Detailed Set-Up Guide; Program Mode; Features & Operations

2 TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipment 3 About WWVB 3 Quick Set-Up Guide 4 Detailed Set-Up Guide Battery Installation 5 Program Mode Programming Sequence 6 Function Buttons 6 Time Zone Setting 6-7 DST (Daylight Saving Time) Setting 7 Adjustable Snooze 7-8 Time Set...

Page 3 - INVENTORY OF CONTENTS; AC adapter/transformer

3 INVENTORY OF CONTENTS 1) WT-5720 projection alarm 2) AC adapter/transformer 3) Instruction manual and warranty card. ADDITIONAL EQUIPMENT (not included) 1) Two fresh 1.5V AA batteries (optional for projection alarm) ABOUT WWVB (Radio Controlled Time) The NIST (National Institute of Standards and T...

Page 5 - Remove the battery cover.

5 DETAILED SET-UP GUIDE I. BATTERY INSTALLATION A. Projection Alarm 1. Remove the battery cover. 2. Observe the correct polarity, and install 2 AA batteries. 3. In addition or instead of inserting batteries, the AC adapter can be used. Simply plug the adapter into the receptacle on the underneath of...

Page 6 - Time Zone Setting; “SET”

6 II. PROGRAM MODE To enter the Program Mode, hold down the “SET” button for 1 second, until the time zone (“-5” default) flashes in the lower right. The program mode guide is laid out in a manner that allows you to program each function separately, or you can follow the instructions entirely to pro...

Page 8 - Date Setting

8 5. Press and release the “SET” button to confirm the snooze setting and to advance to manually set the time. F. Time Setting Note: When the WWVB signal is found, that time will over-ride the manually set time. 1. Hold down the “SET” button for 1 second. 2. The selected time zone will flash). 3. Pr...

Page 9 - Selecting

9 H. 12/24-Hour Setting Note: Setting to the 24-hour mode (also known as Military Time) will also change the temperature to display in ° C instead of ° F. 1. Hold down the “SET” button for 1 second. 2. The selected time zone will flash. 3. Press and release the “SET” button 9 times until the “12” ho...

Page 10 - Radio-Controlled Time and Date

10 FEATURES & OPERATIONS A. Features 1. Radio-controlled time and date 2. Projection of time 3. LCD light 4. Six modes of date/seconds/temperature display 5. Indoor temperature 6. Remote temperature 7. Dual alarms 8. Adjustable snooze B. Radio-Controlled Time and Date 1. The projection alarm wil...

Page 12 - Time Alarm; “SNOOZE”

12 F. Time Alarm The projection alarm has two separate alarms for time, “ALM1” and “ALM2”. The alarms have a different sound; ALM1 increases in volume after 25 seconds, and again after 50 seconds. ALM2 is a constant volume. The total duration is 96 seconds for each alarm. 1. Setting the Alarm a) Pre...

Page 16 - Every 10 seconds indoor

16 SPECIFICATIONS FOR WT-5720 Temperature: Measuring range: 32 ° F to 122 ° F with 0.2 ° F resolution (indoor) (0 ° C to 50 ° C with 0.1 ° C resolution) Checking intervals: Every 10 seconds indoor Power source: AC Adapter (included) Input: 120VAC/60Hz Output: DC 6V/100MA Battery type: Station: 2 x A...