La Crosse Technology 616-146 - Manual
La Crosse Technology 616-146 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Table of Contents
- Page 4 – This projection alarm will come with; one; Both transmitters work interchangeably.; Install Batteries in the TX14 Transmitter; Be careful not to break the tabs on the battery cover.; Function Buttons; Button
- Page 5 – Once; : Backlight and Projection low intensity; Twice; : Backlight and Projection OFF (A/C); Third time; : Backlight and projection ON high; Program Menu; WWVB reception ON or OFF; WWVB; DST; ON
- Page 6 – Alarm Set
- Page 9 – If the signal is good, it may catch a signal in ABOUT 2-3 minutes.; program menu
- Page 11 – Keep Projection Alarm dry.; Warranty Information
1
Atomic Projection Alarm
with Indoor and Outdoor Temperature
This Atomic Projection Alarm with snooze alarm and backlit display projects time and outdoor
temperature on your wall or ceiling in a variety of ways. It automatically sets the time and date based on
your time zone, and even updates Daylight Saving Time for you. Monitor indoor and outdoor temperature,
track temperature trends and charge your smartphone or other device with the USB charging port --all in
one convenient device for your desktop or bedside table. It runs on AC power with battery backup, and
has a wireless transmission range of over 200 ft. to the backyard temp. sensor.
Atomic Projection Alarm
NOTE:
This projection alarm will come with
one
TX141 transmitter
OR
one
TX14 transmitter.
Both transmitters work interchangeably.
Get Support:
http://www.lacrossetechnology.com/616-146
INITIAL SETUP
Step 1:
Insert the included 5-volt AC power adapter into projection alarm and then into wall outlet.
Step 2:
Insert 3 new
“AAA” batteries (not included) into the projection alarm. Observe the correct polarity.
Step 3:
Insert 2 new “AA” batteries (not included) into the TX141 transmitter. Observe the correct polarity.
The red LED will flash with transmitting.
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Standard, Lithium or Rechargeable Batteries
RESTART:
If the outdoor temperature is not displayed after 3 minutes, unplug the AC adapter and remove
batteries from the projection alarm & transmitter for 15 minutes.
Return to
Step 1
above.
Model: 616-146
Instruction Manual
Time, Alarm
+ Calendar
Outdoor/Indoor
Temperature
TX141
Outdoor
Transmitter
Projection
Arm
Rotates 180º
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Table of Contents Atomic Projection Alarm 1 Initial Setup 1 Restart 2 Table of Contents 2 Features 3 Power the Projection Alarm 3 A/C Adapter 3 Batteries 3 Install Batteries in the TX141 Transmitter 4 Install Batteries in the TX14 Transmitter 4 Functions Buttons 4 Program Menu 5 WWVB Reception On/...
4 ATOMIC SIGNAL SEARCH: The LCD backlight, projection and USB charging port will momentarily turn off while the station searches for the atomic signal. After the initial search, this station will only search for the atomic signal after midnight. Install Batteries in the TX141 Transmitter NOTE: This ...
5 SNOOZE/LIGHT HI/LOW/OFF Once : Backlight and Projection low intensity (A/C) Twice : Backlight and Projection OFF (A/C) Third time : Backlight and projection ON high intensity (default, A/C adapter) Battery Power: Activate backlight for 10 seconds Trigger snooze alarm (ringing) Program Menu The SET...
