Kettler 2577 - Manual
Kettler 2577 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Made in the U.S.A.
www.kettlerusa.com
Copyright
©
Kettler USA 309.01
2577 18” Square Side Table
Contents:
(2) Legs
(1) Center Brace
(1) Table Top
(6) 1/4 - 20 x 2” Bolts
Tool Required:
#3 Phillips Head
Screwdriver
Assembly Instructions
1.
Place leg inside the frame underneath the
table top aligning the predrilled holes. Insert
two 1/4-20 x 2” bolts then tighten them with the
phillips screwdriver.
Repeat on the other side.
2.
Place the center support brace vertically
between the legs aligning the predrilled holes.
Insert a 1/4-20 x 2” bolt thru the hole into the
center brace then tighten it with the phillips
screwdriver.
Repeat on the other leg.
2.
1.
Aligning the predrilled holes on the leg with and
metal insert on the frame insert the bolt.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
