Kettler 2555 - Manual
Kettler 2555 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
2555 ADIRONDACK FOOTREST
Properly Seated
Washer and Locknut.
Slide washer
onto end of
bolt, then attach
and tighten the
locknut.
1.
Align holes then insert the
1/4 - 20 x 2” bolts.
Made in the U.S.A.
www.kettlerusa.com
Copyright
©
Kettler USA 309.01
Assembly Instructions
1. Align leg to predrilled holes and insert 1/4-20 x 2” bolts
then clean any plastic residue from the bolt
. Slide on washers and
tighten the locknuts with the 7/16” wrench.
Repeat to attach the
leg on the other side.
2. Place the cross brace between the legs aligning the predrilled
holes on the end of the cross brace and the footrest legs. Insert
a 1/4-20 x 2” bolt and tighten with phillipshead screwdriver to
secure.
Repeat to attach the brace on the other side.
Contents:
(1) Footrest Bed
(2) legs
(1) Cross Brace
(6) 1/4 - 20 x 2” Bolts
(4) Washers
(4) Locknuts
Tools Required:
#3 Phillips Head Screwdriver
7/16” Wrench
Align holes then insert the
1/4 - 20 x 2” bolts.
2.
Locknut Washer 1/4-20 x 2” Bolt
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
