Page 2 - Position And Reproduction Of Labels; How to reset your unit
2 ENGLISH Caution:This product contains a laser componentof higher laser class than Class 1. CLASS LASER 1 PRODUCT CAUTION: Invisible laser radiation when open and interlock failed or defeated. AVOID DIRECT EXPOSURE TO BEAM. (e) ADVARSEL: Usynlig laser-stråling ved åbning, når sikkerhedsafbrydere er...
Page 3 - ENGLISH; CONTENTS; CAUTION on Volume Setting
3 ENGLISH CONTENTS Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. How to reset your unit ............................... 2 LOCATION OF THE BUTTONS .........
Page 4 - Control panel; LOCATION OF THE BUTTONS
4 ENGLISH How to use the number buttons: If you press M/B (mode/band), the unit goes into functions mode and the number buttons work asdifferent function buttons. To use these buttons as number buttons again after pressing M/B (mode/band), wait for 5 secondswithout pressing any number button until t...
Page 5 - Remote controller
ENGLISH 5 3 Changes the angle of the control panel in threepositions. 4 Selects the sound modes.Each time you press the button, sound modeschange. 5 • Searches stations while listening to the radio.• Selects ensembles while listening to the DAB tuner if pressed briefly. • Selects services while list...
Page 6 - Preparing the remote controller; Installing the battery
ENGLISH 6 Preparing the remote controller 2. Place the battery. Slide the battery into the holder with the + sidefacing upwards so that the battery is fixed inthe holder. Lithium coin battery(product number:CR2025) 3. Return the battery holder. Insert again the battery holder pushing it untilyou hea...
Page 7 - BASIC OPERATIONS
7 ENGLISH 1 Turn on the power and select thesource. When you press the button forthe first time, the power comeson. Then each time you pressthe button, the source changesas follows. * If a CD is not in the loading slot, you cannotselect CD as the source to play. ** Without connecting the DAB Tuner o...
Page 8 - Listening to the radio; Start searching a station.; RADIO BASIC OPERATIONS
8 ENGLISH Listening to the radio You can use either automatic searching ormanual searching to tune into a particular station. Searching a station automatically:Auto search 1 Select the FM or AM. 1 Press SOURCE repeatedly to select FMor AM as the source. 2 If necessar y, to selectthe FM band number,p...
Page 9 - Press and hold; Storing stations in memory; FM station automatic preset: SSM
9 ENGLISH 2 Press and hold ¢ or 4 until “M” (manual) starts flashing on thedisplay. 3 Tune into a station you want while “M”is flashing. • If you release your finger from the button, the manual mode will automatically turn offafter 5 seconds. • If you hold down the button, the frequency keeps changi...
Page 10 - Manual preset; Tuning into a preset station
10 ENGLISH Manual preset You can preset up to 6 stations in each band(FM1, FM2, FM3 and AM) manually.Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 1 Select the band (FM1–3, AM) youwant to store stations into (in thisexample, FM1). 1 Press SOURCE repeatedly to select...
Page 11 - What you can do with RDS EON; RDS OPERATIONS
11 ENGLISH To use Network-Tracking Reception, press andhold TP (traffic programme) for more than 1 second.Each time you press and hold the button, Network-Tracking Reception modes change as follows: Mode 1Network-Tracking Reception is activated withRegionalization set to “off.”Switches to another st...
Page 12 - Using Standby Reception; TA Standby Reception
12 ENGLISH The same programme can be received ondifferent frequencies. PTY Standby Reception When you press PTY while listeningto an FM station, the PTY indicator islit during reception of a PTY stationand the PTY standby mode isengaged. The selected PTY namestored on page 13 flashes for 5seconds. •...
Page 13 - Searching your favorite programme; To store your favorite programme types
13 ENGLISH Selecting your favorite programme forPTY Standby Reception You can select your favorite programme for PTYStandby Reception to store in memory.When shipped from the factory, “NEWS” is storedas the programme type for PTY Standby Reception. 1 Press and hold SEL (select) for morethan 2 second...
Page 15 - Setting the TA volume level
15 ENGLISH Changing the display mode whilelistening to an FM station You can change the initial indication on the displayto station name (PS NAME) or station frequency(FREQUENCY) while listening to an FM RDSstation.• See also “Changing the general settings (PSM)” on page 23. 1 Press and hold SEL (se...
Page 17 - CD OPERATIONS; Playing a CD; Open the loading slot.; To stop play and eject the CD
17 ENGLISH CD OPERATIONS Playing a CD 1 Open the loading slot. The control panel moves down,and the loading slot appears. Note: W h e n a n e x t e r n a l c o m p o n e n t i sconnected to the Auxiliary input jack,Be careful of handling a CD. 2 Insert a disc into the loading slot. The unit draws a ...
Page 18 - Playing a CD Text; To fast-forward or reverse the track; To go to the next track or the previous tracks
18 ENGLISH Playing a CD Text In a CD Text, some information about the disc (itsdisc title, performer and track title) is recorded.You can show these disc information on thedisplay. 1 Select text display mode whileplaying a CD Text. Each time you press the button,the display changes as follows: Notes...
Page 19 - Selecting CD playback modes; To play back tracks at random (Random Play); Prohibiting CD ejection
19 ENGLISH Selecting CD playback modes To play back tracks at random (Random Play) 1 Press M/B (mode/band) to enterthe functions mode while playinga CD. This unit enters thefunctions mode. 2 Press RND (random), while stillin the functions mode, so thatthe RND indicator lights up onthe display.Then, ...
Page 20 - Select the item you want to adjust.; SOUND ADJUSTMENTS; Adjusting the sound; VOL
20 ENGLISH 1 Select the item you want to adjust. Each time you press the button,the adjustable items change asfollows: Indication To do: Range FAD* Adjust the front R06 (Rear only) and rear speaker | balance. F06 (Front only) BAL Adjust the left L06 (Left only) and right speaker | balance. R06 (Righ...
Page 21 - Selecting preset sound modes; Select the sound mode you want.
21 ENGLISH Selecting preset sound modes You can select a preset sound mode suitable tothe music genre. 1 Press EQ. The last selected sound modeis recalled, and it is applied tothe current source. 2 Select the sound mode you want. As you turn the controldial, the sound modeschange as follows: FLAT O ...
Page 22 - Press EQ to store the adjustments.; To reset to the factory settings; Adjust the selected sound element.
22 ENGLISH Preset values LOW MID HIGH 50 Hz 700 Hz 8 kHz 80 Hz 1 kHz 12 kHz 120 Hz 2 kHz 1 (min.) 1 (min.) | | 4 (max.) 2 (max.) –06 (min.) –06 (min.) –06 (min.) | | | +06 (max.) +06 (max.) +06 (max.) 4 Repeat step 2 and 3 to adjust the othersound elements. 5 Select one of the user sound modes(USER1...
Page 23 - Setting the clock; Select the clock system.; OTHER MAIN FUNCTIONS; Basic Procedure; Adjust the PSM item selected.
23 ENGLISH Setting the clock 1 Press and hold SEL (select) for morethan 2 seconds so that one of the PSMitems appears on the display.(See page 24.) 2 Set the hour. 1 Select “CLOCK HOUR” if not shown onthe display. 2 Adjust the hour. 3 Set the minute. 1 Select “CLOCK MIN.” 2 Adjust the minute. 4 Sele...
Page 26 - LINE ADJ
26 ENGLISH To adjust the line input level – LINE ADJ (For KD-SH77R only) Adjust the line input level properly when anexternal component is connected to the LINE INplugs.When shipped from the factory, the line input levelis set at level 00.If the input level of the connected component isnot high enou...
Page 27 - Assigning names to the sources; To erase the input characters
27 ENGLISH Assigning names to the sources You can assign names to CDs and the externalcomponents.After assigning a name, it will appear on thedisplay when you select the source. Sources Maximum number ofthe characters CDs * up to 32 characters(up to 40 discs) External components up to 10 characters ...
Page 28 - Adjust the angle to the position you want.; When using the remote controller
28 ENGLISH Changing the control panelangle You can change the angle of the control panel inthree positions. Adjust the angle to the position you want. Each time you press the button,the panel angle changes asfollows: When using the remote controller Press ANGLE ∞ repeatedly. Each time you press the ...
Page 29 - Detaching the control panel; Unlock the control panel.; Attaching the control panel
29 ENGLISH Detaching the control panel You can detach the control panel when leavingthe car.When detaching or attaching the control panel,be careful not to damage the connectors on theback of the control panel and on the panelholder. Detaching the control panel Before detaching the control panel, be...
Page 30 - Playing external components; EXTERNAL COMPONENT OPERATIONS
ENGLISH 30 Playing external components For KD-SH77R: You can connect two external components to thisunit.Connect one to the auxiliary input jack on thecontrol panel, and the other to the LINE IN plugson the rear. If you connect a JVC’s VCR or DVD playerto the LINE IN plugsYou can operate it through ...
Page 32 - Playing CDs; CD CHANGER OPERATIONS
32 ENGLISH We recommend that you use one of the CH-X serieswith your unit.If you have another CD automatic changer, consultyour JVC IN-CAR ENTERTAINMENT forconnections. • For example, if your CD automatic changer is one of the KD-MK series, you need a cord (KS-U15K) forconnecting it to this unit. Be...
Page 34 - Select the DAB tuner.; DAB TUNER OPERATIONS
ENGLISH 34 Tuning into an ensemble andone of the services A typical ensemble has 6 or more programmes(services) broadcast at the same time. After tuninginto an ensemble, you can select a service youwant to listen to. 1 Select the DAB tuner. When you select asource,the power automaticallycomes on.Eac...
Page 35 - Start searching an ensemble.
ENGLISH 35 3 Start searching an ensemble. When an ensemble is received, searchingstops. To stop searching before an ensemble isreceived, press the same button you havepressed for searching. 4 Select a service you want to listen to. 1 Press M/B (mode/band). 2 Press ¢ or 4 to select a service you want...
Page 37 - What you can do more with DAB; To use Alternative Reception
ENGLISH 37 Tuning into a preset DABservice You can easily tune into a preset DAB service.Remember that you must store services first. Ifyou have not stored them yet, see page 36. 1 Select the DAB tuner. When you select a source,the power automaticallycomes on.Each time you press thebutton, the sourc...
Page 38 - Available characters; Capital letters; Small letters; ADDITIONAL INFORMATION
38 ENGLISH Indication Preset equalizing values FREQ. WIDTH LOW LEVEL FREQ. WIDTH MID LEVEL FREQ. HIGH LEVEL FLAT 50 Hz 1 00 700 Hz 1 00 8 kHz 00 Hard Rock 80 Hz 2 +03 700 Hz 1 00 8 kHz +02 R & B 80 Hz 3 +03 2 kHz 2 +01 12 kHz +03 POP 120 Hz 1 +02 2 kHz 2 +01 12 kHz +02 JAZZ 80 Hz 1 +03 1 kHz 1 +...
Page 39 - Handling CDs; How to handle CDs; To keep CDs clean; MAINTENANCE
39 ENGLISH Handling CDs This unit has been designed to reproduce theCDs bearing the following marks. You can also play back your original CD-Rs(Recordable) and CD-RWs (Rewritable) on thisreceiver.This unit is not compatible with MP3. How to handle CDs When removing a CD from itscase, press down the ...
Page 40 - TROUBLESHOOTING
40 ENGLISH What appears to be trouble is not always serious. Check the following points before calling a servicecenter. Symptoms • CD cannot be played back. • CD sound is sometimes interrupted. • Sound cannot be heard from the speakers. • SSM (Strong-station Sequential Memory)automatic preset does n...
Page 41 - AUDIO AMPLIFIER SECTION; SPECIFICATIONS
41 ENGLISH AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 50 W per channel Rear: 50 W per channel Continuous Power Output (RMS): Front: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than0.8% total harmonic distor tion. Rear: 19 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more...
Page 42 - Having TROUBLE with operation?; Please reset your unit; Refer to page of How to reset your unit; Haben Sie PROBLEME mit dem Betrieb?; Bitte setzen Sie Ihr Gerät zurück; Siehe Seite Zurücksetzen des Geräts; Vous avez des PROBLÈMES de fonctionnement?; Réinitialisez votre appareil; Hebt u PROBLEMEN met de bediening?; Stel het apparaat terug; Zie de pagina met de paragraaf Het apparaat terugstellen
EN, GE, FR, NL 0201MNMMDWJES J V C VICTOR COMPANY OF JAPAN, LIMITED Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Seite Zurücksetzen des Geräts Vous avez des PROBLÈMES de fonct...
Page 43 - • This unit is designed to operate on 12 V; DEUTSCH; Before mounting: Press
KD-SH77R/KD-SH55R Installation/Connection ManualEinbau/AnschlußanleitungManuel d’installation/raccordementHandleiding voor installatie/aansluiting J V C 0201MNMMDWJESEN, GE, FR, NL LVT0629-001A [E/EX] ENGLISH • This unit is designed to operate on 12 V DC, NEGATIVE ground electrical systems. INSTALLA...
Page 44 - (Bewaar de hendels nadat u
* Not included with this unit. * Nicht Teil dieses Geräts. * Non fourni avec cet appareil. * Niet meegeleverd. • When using the optional stay• Beim Verwenden der Anker-Option• Lors de l’utilisation du hauban en option• Wanneer u de steun gebruikt (facultatief) Removing the unit • Before removing the...
Page 46 - Avant de commencer la connexion:
4 3 4 5 6 1 2 3 7 2 A4 A2 B4 B1 A1 B3 A3 B4 A4 B2 A2 B3 A3 15 (ILLUMINATION) A1 See diagram C . Siehe Schaltplan C . Voir le diagramme C . Zie schema C . LINE OUT(REAR) LINE OUT(FRONT) DEUTSCH B Connections without using the ISO connectors / Anschlüsse ohne ISO-Stecker / Connexions sans l’utilisatio...
Page 48 - Extern apparaat
L R L R L R L R CD changer and DAB tuner / CD-Wechsler und DAB-Tuner / Changeur CD et tuner DAB / CD-wisselaar en DAB-tuner CAUTION / VORSICHT / PRECAUTION / LET OP!:• Before connecting the CD changer and/or the DAB tuner, make sure that the unit is turned off. • Bevor Sie den CD-Wechsler und/oder d...
