JVC KD-S641 - Manual

5 ENGLISH BASIC OPERATIONS Turning on the power 1 Turn on the power. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not haveto press this button to turn on the power. 2 Select the source. To operate the tuner (FM or AM), see pages 7 – ...

6 ENGLISH Setting the clock 1 Press and hold SEL (select) for morethan 2 seconds. “CLOCK H,” “CLOCK M,” “SCM LINK,” or“LEVEL” appears on the display. 2 Set the hour. 1 Select “CLOCK H” (hour) if not shown onthe display. 2 Adjust the hour. 3 Set the minute. 1 Select “CLOCK M” (minute). 2 Adjust the m...

7 ENGLISH RADIO OPERATIONS Listening to the radio You can use either automatic searching ormanual searching to tune in to a particularstation. Searching a station automatically:Auto search 1 Select the band (FM1 – 3, AM). Note: This receiver has three FM bands (FM1, FM2,FM3). You can use any one of ...

8 ENGLISH Searching a station manually:Manual search 1 Select the band (FM1 – 3, AM). Note: This receiver has three FM bands (FM1, FM2,FM3). You can use any one of them to listen toan FM broadcast. 2 Press and hold ¢ or 4 until “M” (manual) starts flashing onthe display. 3 Tune in to a station you w...

9 ENGLISH Storing stations in memory You can use one of the following two methods tostore broadcasting stations in memory.• Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM s...

10 ENGLISH 3 Press and hold the number button(in this example, 1) for more than 2seconds. 4 Repeat the above procedure to storeother stations into other presetnumbers. Notes: • A previously preset station is erased when a new station is stored in the same preset number. • Preset stations are erased ...

11 ENGLISH Playing a CD Insert a CD into the loading slot. The unit turns on, drawsthe CD and startsplayback automatically. Note on One-Touch Operation: When a CD is already in the loading slot, pressingCD turns on the unit and starts playbackautomatically. All tracks will be played repeatedly until...

12 ENGLISH Locating a track or aparticular portion on a CD To fast-forward or reverse the track To go to the next tracks or the previoustracks To go to a particular track directly Press the number button corresponding to thetrack number to start its playback.• To select a track number from 1 – 6: Pr...

13 ENGLISH To play back tracks repeatedly(Repeat Play) You can play back the current track repeatedly. 1 Press MODE to enter thefunctions mode while playing aCD. 2 Press RPT (repeat), while stillin the functions mode, so thatthe RPT indicator lights up onthe display.Each time you press thebutton, CD...

14 ENGLISH SOUND ADJUSTMENTS Adjusting the sound You can adjust the sound characteristics to yourpreference. 1 Select the item you want to adjust. Each time you press thebutton, the adjustable itemschange as follows: Indication To do: Range BAS Adjust the bass. –06 (min.) |+06 (max.) TRE Adjust the ...

15 ENGLISH Indication For: Preset values BAS TRE LOUD SCM OFF (Flat sound) 00 00 ON BEAT Rock or +02 00 ON disco music SOFT Quiet +01 –03 OFF backgroundmusic POP Light music +04 +01 OFF Recalling the sound modes When “SCM LINK” is set to “LINK ON,”select the source. Each time you change theplayback ...

16 ENGLISH 3 Repeat step 2 to adjust the other items. 4 Press and hold SCM until the soundmode you have selected in step 1 flashes on the display. Your adjustment made for theselected sound mode is storedin memory. 5 Repeat the same procedure to storeother sound modes. To reset to the factory settin...

17 ENGLISH Selecting the level display—LEVEL You can select the level display according to yourpreference.When shipped from the factory, “VOL 2” isselected.• VOL 1: Shows the volume level indicator.• VOL 2: Alternates “VOL 1” setting and illumination display. • OFF: Erases the volume level indicator...

18 ENGLISH Detaching the control panel You can detach the control panel when leavingthe car.When detaching or attaching the control panel,be careful not to damage the connectors on theback of the control panel and on the panelholder. Detaching the control panel Before detaching the control panel, be...

19 ENGLISH TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a servicecenter. General Remedies Adjust it to the optimum level. Check the cords andconnections. Press and hold both SEL(select) and (standby/ on/attenuator) at the same timefor se...

20 ENGLISH MAINTENANCE Handling discs This unit has been designed to reproduce CDsand CD-Rs (Recordable). • This unit is not compatible with MP3 discs. How to handle discs When removing a discfrom its case, press down the center holder of the caseand lift the disc out, holdingit by the edges.• Alway...

21 ENGLISH AUDIO AMPLIFIER SECTION Maximum Power Output: Front: 45 W per channel Rear: 45 W per channel Continuous Power Output (RMS): Front: 17 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more than0.8% total harmonic distortion. Rear: 17 W per channel into 4 Ω , 40 Hz to 20 000 Hz at no more ...

EN, GE, FR, NL 1102KKSMDTJEIN Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb? Bitte setzen Sie Ihr Gerät zurück Siehe Seite Zurücksetzen des Geräts Vous avez des PROBLÈMES de fonctionnement? Réinitialisez votre apparei...

2 • When installing the unit without using the sleeve• Beim Einbau des Geräts ohne Halterung• Lors de l’installation de l’appareil scans utiliser de manchon• Wanneer u het apparaat zonder huis installeert In a Toyota for example, first remove the car radio and install the unit in its place. Zum Beis...

3 5 1 2 3 4 2 P L O M 4 * * 3 15 F E D C H G B A View from the lead side Ansicht von der Leitungsseite Vue à partir du côté des fils Aanzicht vanaf het snoer From the car body Von der Karosserie De la carrosserie de la voiture Vanaf de auto Original wiring Originalverdrahtung Câblage original Origin...