Jet 708596K - User Manual
Jet 708596K Grinding Machine – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – WARNING
- Page 4 – SAND with the grain of the wood.
- Page 5 – Grounding Instructions; Repair or replace a damaged or worn cord immediately.
- Page 7 – Read and understand the entire contents of; Unpacking
- Page 8 – Assembly; CAUTION; Machine is heavy! Use care when lifting out
- Page 9 – Sanding Belt Table Adjustment; Always disconnect the sander from the; Set a combination square on the
- Page 10 – Horizontal Sanding Workstop; Tighten the; Sanding Belt Replacement; Slide the belt off of both sanding drums.
- Page 11 – Belt Tracking Adjustment; Note: when tightening the; Disc Table Adjustment
- Page 14 – Sander will not start
- Page 15 – Disc Sander Assembly Breakdown
- Page 16 – Index
- Page 18 – Belt Sander Assembly Breakdown
- Page 19 – Belt Sander Assembly
- Page 21 – Open Stand Breakdown
- Page 22 – JSG-96 Open Stand Assembly
- Page 23 – Closed Stand Breakdown
- Page 24 – Closed Stand Assembly
OWNER'S MANUAL
JSG-96 Benchtop Disc/Belt Sander
(shown with optional closed stand 708597)
JET EQUIPMENT & TOOLS, INC.
P.O. BOX 1349
Phone:253-351-6000
A W MH Company
Auburn, W A 98071-1349
Fax: 1-800-274-6840
www.jettools.com
e-mail [email protected]
M-708595 07/01
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 WARNING Wear eye protection. Always keep guards in place and in proper operating condition. Do not operate the machine without the guards for any reason. This disc/belt sander is intended to be used with wood and wood products only. Use of this disc/belt sander and a dust collector with metal prod...
4 • ALWAYS DISCONNECT THE MACHINE FROM THE POWER SOURCE BEFORE SERVICING. • REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure the switch is in the off positionbefore plugging in. • USE RECOMMENDED ACCESSORIES. The use of accessories and attachments notrecommended by JET may cause hazards or risk ...
5 Grounding Instructions Caution: This tool must be grounded while in use to protect the operator from electric shock. In the ev ent of a malfunction or breakdown, grounding prov ides a path of least resistance for electriccurrent to reduce the risk of electric shock. This tool is equipped with an e...
