Impex NS-1003U - Manual - manualsarea.com

Page 2 - TABLE OF CONTENTS; WARNING LABEL PLACEMENT............................................................. 3; BEFORE YOU BEGIN; please call our TOLL-FREE customer service number.; Toll-Free Customer Service Number

TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................…. 1 IMPORTANT SAFETY NOTICES..................................................................…. 2 WARNING LABEL PLACEMENT……………………………………………………. 3 HARDWARE PACK……….....….................

Page 3 - IMPORTANT SAFETY NOTICE; PRECAUTIONS; STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.; This exercise bike is for consumer and home use only.

© IMPEX INC. 2 IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the followin...

Page 4 - WARNING LABEL PLACEMENT

WARNING LABEL PLACEMENT The Warning Labels and Caution Label shown here have been placed on the Rear Stabilizer, Main Frame. If the labels are missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the labels in location shown. © IMPEX INC. 3

Page 5 - HARDWARE PACK; Identifier; Curved Washer Ø 5/8”

HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size. No. Description Identifier Q’ty 15 Carriage Bolt M8 x 2 3/8” 4 16 Curved Washer Ø 5/8” 8 17 M8 Acorn Nut 4 18 Allen Bolt M8 x 5/8“ 4 26 T-shaped Lock Knob 1 #6 Allen Wrench 1 Crossing Wrenc...

Page 6 - avoid possible injury.

COMPONENTS FOR ASSEMBLY ASSEMBLY INSTRUCTION  Tools Required For Assembling the Machine: One Crossing Wrench and Allen Wrench, provided by manufacturer.  NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury. © IMPEX INC. 5

Page 7 - STEP 2

STEP-1 A.) Do not tighten Bolts until instructed to do so. B.) Attach the Front Stabilizer (#2) to the Main Frame (#1). Secure it with two M8 x 2 3/8” Carriage Bolts (#15), two Ø 5/8” Curved Washers (#16), and two Acorn Nuts (#17). C.) Attach the Rear Stabilizer (#3) to the Main Frame (#1). Secure i...

Page 8 - STEP 3

C.) Pull the tension connector from the Upper Tension Cable (#20) and slide in between the opening on the connector on the Lower Tension Cable (#23). Pull the Upper Tension Cable upward and slide the wire through the slot on the bracket. D.) Drop down the Upper Tension Cable so the fitting sits firm...

Page 9 - bracket on Front Post. Secure it with the two Screws.

A.) Attach the Handle (#5) to the Front Post (#4). Secure it with one Bracket (#30), one M8 x ¾” Allen Bolt (#19), and one T-shaped Lock Knob (#26). B.) Connect Upper Computer Wire (#28) from Computer (#6) to the Middle Computer Wire (#21) from Front Post. C.) Remove the two M5 x 3/8” Philips Screws...

Page 11 - EXPLODED DIAGRAM

A.) Thread the Left Pedal (#9) counterclockwise into the Crank (#25). B.) Thread the Right Pedal (#10) clockwise into the Crank on the other side. EXPLODED DIAGRAM © IMPEX INC. 10

Page 12 - PARTS LIST

Page 13 - QUANTITY

© IMPEX INC. 12 PART NO. DESCRIPTION SPEC. QUANTITY 1 Main Frame 1 2 Front Stabilizer 1 3 Rear Stabilizer 1 4 Front Post 1 5 Handle 1 6 Computer 1 7 Seat Post 1 8 Seat 1 9 Left Pedal 1 10 Right Pedal 1 11 Lock Knob 1 12 Washer Ø 5/8” 3 13 Lock Washer Ø 5/8” 3 14 Aircraft Nut M8 3 15 Carriage Bolt M8...

Page 14 - CARE, MAINTENANCE AND STORAGE; The maximum user weight is 300 lbs.; OPERATING NOTES; ADJUSTMENT; COMPUTER

© IMPEX INC. 13 CARE, MAINTENANCE AND STORAGE 1. Inspect and tighten all parts each time you use the machine. Replace any worn parts immediately. 2. The bike can be cleaned using a damp cloth and mild non-abrasive detergent. Do not use solvents. 3. Store the bike IN-DOOR. Excess moisture and water w...

Page 15 - Display the elapsed time. Max value is up to 99:59; Speed; Display the current speed in miles per hour.; Distance; Display the distance traveled in Miles. Max value is 99.99 miles.; Calories; Display the calorie consumption in cal.; EXERCISE GUIDELINES

AUTO START / STOP When exercise starts, the monitor will automatically turn on and display the progress. When exercise stops, the monitor will automatically turn off after 8 minutes to save energy. Press “MODE” key, will automatically scan Time, Speed, Distance, Calories, and ODO for every 4 seconds...

Page 16 - Using your; MAGNETIC BIKE; The Exercise Phase

Using your MAGNETIC BIKE will provide you with several benefits, it will improve your physical fitness, tone muscle and in conjunction with calorie controlled diet help you lose weight. 1. The Warm Up Phase This stage helps get the blood flowing around the body and the muscles working properly. It w...

Page 17 - MUSCLE TONING; To tone muscle while on your; you will need to have the resistance set quite; WEIGHT LOSS; IMPEX

© IMPEX INC. 16 This stage is to let your Cardio-vascular System and muscles wind down. This is a repeat of the warm up exercise e.g. reduce your tempo, continue for approximately 5 minutes. The stretching exercises should now be repeated, again remembering not to force or jerk your muscles into the...

Page 18 - LIMITED WARRANTY

© IMPEX INC. 17 LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser....

Impex NS-1003U - Manual

Table of Contents:

Summary

Other Impex Models