Impex MSS-7500 - Manual - manualsarea.com

Page 2 - TABLE OF CONTENTS; BEFORE YOU BEGIN; INC. For your safety and benefit, read this manual carefully before; please call our TOLL-FREE customer service number.; Our Customer; Toll-Free Customer Service Number

TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICE....................................................................... 2 HARDW ARE PACK………..................................................................

Page 3 - IMPORTANT SAFETY NOTICE

IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precau...

Page 7 - ASSEMBLY INSTRUCTION; STEP 1; DIAGRAM 1

ASSEMBLY INSTRUCTION Tools Required For Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended for two or more people to assemble this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Do not tighten the Nuts and Bolts until instructed to do s...

Page 8 - DIAGRAM 2

STEP 2 (See Diagram 2) A.) Attach the Main Seat Support (#3) to the Front Post (#4). Secure it with two M10 x 2 3/8” Carriage Bolts (#32), one 6 ¼” x 3 ¼” Bracket (#14), two Ø ¾” Washers (#36), and two M10 Aircraft Nuts (#38). B.) Attach the Main Seat Support to the Cross Brace (#2). Secure it with ...

Page 9 - STEP 3; DIAGRAM 3

STEP 3 (See Diagram 3) A.) Attach the Seat Bracket (#5) to the pivot on the Main Seat Support (#3). Attach the holes on the end of the two Backrest Supports (#6) to the Seat Bracket. Align the holes. Secure the two Backrest Supports, Seat Bracket together to the pivot with one M12 x 7” Hex Bolt (#26...

Page 10 - STEP 4; DIAGRAM 4

STEP 4 (See Diagram 4) A.) Attach the Leg Developer (#9) to the open bracket on Main Seat Support (#3). Secure it with one Leg Developer Axle (#21), two M10 x ¾” Allen Bolt (#33), and two Ø ¾” Washers (#36). Do not over tighten the Bolts. Make sure the Leg Developer is able to swivel. B.) Insert two...

Page 13 - IMPEX INC; LIMITED WARRANTY

IMPEX INC . LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMP...

Impex MSS-7500 - Manual

Table of Contents:

Summary

Other Impex Models