Impex MWM-7300 - Manual - manualsarea.com

Page 2 - Toll-Free Customer Service Number

TABLE OF CONTENTS BEFORE YOU BEGIN....................................................................................……….. 1 IMPORTANT SAFETY NOTICE...................................................................……….. 2 HARDWARE PACK……….....….........................................................

Page 3 - IMPORTANT SAFETY NOTICE; Keep children and pets away from the machine at all times. DO NOT

IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precau...

Page 4 - WARNING LABEL REPLACEMENT

WARNING LABEL REPLACEMENT The warning labels shown here have been placed on the Base Frame and Upper Frame. If the labels are missing or illegible, please call customer service at 1-800-888-8899 for replacements. Apply the labels in the location shown. 3

Page 5 - HARDWARE PACK

HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler or scale to measure the size. 4

Page 7 - ASSEMBLY INSTRUCTION; Do not tighten Nuts and Bolts until instructed to do so.

ASSEMBLY INSTRUCTION Tools Required for Assembling the Machine: Two Adjustable Wrenches, two Allen Wrenches, and one Philips Screwdriver. NOTE: It is strongly recommended that this machine to be assembled by two or more people to avoid possible injury. STEP 1 (See Diagram 1) A.) Do not tighten Nuts ...

Page 8 - DIAGRAM 1

Page 10 - DIAGRAM 2

Page 11 - Do not over tighten the Nuts. Make

STEP 3 (See Diagram 3) A.) Do not tighten Nuts and Bolts until instructed to do so. B.) Attach the Lower Cross Brace (#16) to the Weight Stack Frame (#17). Secure them with two M10 x 3 1/8” Carriage Bolts (#72), one 5 1/8” x 1 5/8” Bracket (#58), two Ø ¾” Washers (#91), and two M10 Aircraft Nuts (#9...

Page 12 - DIAGRAM 3

Page 13 - DIAGRAM 4

STEP 4 (See Diagram 4) A.) Attach the Right & Left Seat Swivel Frame (#13) & (#14) to Main Base Frame (#1) from each side. Secure them together with one M12 x 7 7/8” Allen Bolt (#74), two Ø 1” Washer (#90), and one M12 Aircraft Nut (#93). Do not over tighten the Nut and Bolt. Make sure the S...

Page 14 - CABLE LOOP DIAGRAM

Page 15 - Note: The Ball Stopper on the cable need to be underneath the

STEP 5 (See Diagram 5 & Cable Loop Diagram) A.) Attach the 205” Upper Cable (#35) to the opening at the front of the Upper Frame (#5). Note: The Ball Stopper on the cable need to be underneath the Frame. B.) Attach a Pulley (#51) to the opening. Secure it with one M10 x 4 1/8” Allen Bolt (#77), ...

Page 16 - DIAGRAM 5

Page 18 - DIAGRAM 6

Page 19 - DIAGRAM 7

STEP 7 (See Diagram 7) A.) Attach the Front Weight Stack Cover (#29) to the Weight Stack Frame (#17). Secure it with six M6 x 2 ½” Philips Screws (#89) and six Cover Spacers (#54). B.) Repeat the Procedure A to install the Rear Weight Stack Cover (#30) to the other side. DIAGRAM 7 18

Page 21 - DIAGRAM 8

Page 22 - Do not over; DIAGRAM 9

STEP 9 (See Diagram 9) A.) Attach the Front Press (#6) to the Front Press Base (#5). Secure it with one 8 ¾” Long Axle (#57), two Ø ¾” Washers (#91), and two M10 Aircraft Nuts (#94). Do not over tighten the Nuts. Make sure the Front Press is able to swivel smoothly. B.) Use the T-shaped Lock Pin (#4...

Page 24 - PARTS LIST; DESCRIPTION

PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Base Frame 1 2 Front Vertical Frame 1 3 Rear Vertical Frame 1 4 Upper Frame 1 5 Front Press Base 1 6 Front Press 1 7 Foot Plate 1 8 Leg Press Frame 1 9 Arm Curl Stand 1 10 Leg Developer 1 11 Seat Support 1 12 Front Seat Swivel Frame 2 13 Right Seat Swivel S...

Page 25 - MWM-7300 WEIGHT RESISTANCE CHART; Numbers are approximate.

MWM-7300 WEIGHT RESISTANCE CHART WEIGHT PLATE Station 1 2 3 4 5 6 7 8 9 Lat Pull 10 20 30 40 50 60 70 80 90 Front Press 15 26 37 48 59 70 81 92 103 Low Pulley 10 20 30 40 50 60 70 80 90 Leg Developer 15 29 43 57 71 85 99 113 127 Leg Press 30 60 90 120 150 180 210 240 270 WEIGHT PLATE Station 10 11 1...

Page 26 - LIMITED WARRANTY

IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IM...

Impex MWM-7300 - Manual

Table of Contents:

Summary

Other Impex Models