Impex MD-805 - Manual - manualsarea.com

Page 2 - TABLE OF CONTENTS; BEFORE YOU BEGIN; Thank you for selecting the MARCY; Toll-Free Customer Service Number

TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................…. 1 IMPORTANT SAFETY NOTICES..................................................................…. 2 HARDWARE PACK…….....….................................................................

Page 3 - IMPORTANT SAFETY NOTICE; CARE AND MAINTENANCE

IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precau...

Page 5 - HARDWARE PACK

HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler or scale to measure the size. 4

Page 6 - ASSEMBLY INSTRUCTION; DIAGRAM 1

ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Connect the Left and Right Upright Beams (#45 & #1) by a Cross ...

Page 7 - DIAGRAM 2

STEP 2 (See Diagram 2) A.) Attach the Front Post (#5) to the Main Seat Support (#4). Secure it with five M10 x ¾” Allen Bolts (#44) and Ø ¾” Washers (#41). DO NOT tighten the Bolts yet. B.) Attach the Main Seat Support to the Cross Brace (#2). Secure it with two M10 x 3 1/8” Carriage Bolts (#34), on...

Page 8 - DIAGRAM 3

STEP 3 (See Diagram 3) A.) Attach the Leg Developer (#7) to the open bracket on the Front Post (#5). Secure it with one M8 x 3 3/8” Allen Bolt (#37), two Ø 5/8” Washers (#42), and one M8 Aircraft Nut (#40). Do not over tighten the Nut and Bolt. Make sure the Leg Developer is able to swivel. B.) Atta...

Page 9 - DIAGRAM 4

STEP 4 (See Diagram 4) A.) Attach the side holes on the two Backrest Supports (#12) to the pivot on the Main Seat Support (#4). Place the other end rest against the Backrest Adjustment Bar (#9). B.) Attach the Backrest Board (#15) onto the Backrest Supports. Secure it with four M6 x 1 ½” Hex Bolts (...

Page 10 - DIAGRAM 5

8 STEP 5 (See Diagram 5) A.) Insert two Foam Tubes (#11) halfway through the holes on the Leg Developer (#7). Push four Foam Rolls (#13) onto the Tubes from both ends. Plug four Foam Roll End Caps (#25) into the ends. B.) Attach the Olympic Sleeve (#20) onto the weight post on the Leg Developer. Att...

Page 12 - PARTS LIST; DESCRIPTION

PARTS LIST KEY NO. DESCRIPTION QUANTITY 1 Right Upright Beam 1 2 Cross Brace 1 3 Crutch 2 4 Main Seat Support 1 5 Front Post 1 6 Arm Curl Stand 1 7 Leg Developer 1 8 Arm Curl Handle 1 9 Backrest Adjustment Bar 1 10 4 ¾” x 2” Bracket 1 11 Foam Tube 2 12 Backrest Support 2 13 Foam Roll 4 14 Seat Pad 1...

Page 13 - LIMITED WARRANTY

IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IM...

Impex MD-805 - Manual

Table of Contents:

Summary

Other Impex Models