Impex MD-844 - Manual - manualsarea.com

Page 2 - TABLE OF CONTENTS; BEFORE YOU BEGIN; INC. For your safety and benefit, read this manual carefully before; please call our TOLL-FREE customer service number.; Our Customer; Toll-Free Customer Service Number

TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICE....................................................................... 2 HARDWARE PACK………...................................................................

Page 3 - IMPORTANT SAFETY NOTICE

IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precau...

Page 5 - HARDWARE PACK

HARDWARE PACK NOTE: The following parts are not drawn to scale. Please use your own ruler to measure the size. 4

Page 7 - ASSEMBLY INSTRUCTION; STEP 1

ASSEMBLY INSTRUCTION Tools Required For Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended for two or more people to assemble this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Attach one Rear Base Frame (#3) to the Base Frame (#2). At...

Page 8 - DIAGRAM 1

Page 9 - DIAGRAM 2

STEP 2 (See Diagram 2) A.) Attach the Main Seat Support (#6) to the Base Frame (#2). Secure it with two M10 x 3 ½” Carriage Bolts (#43), one 4 ¾” x 2” Bracket (#15), two Ø ¾” Washers (#53), and two M10 Aircraft Nuts (#57). Do not tighten the Nuts and Bolts yet. B.) Attach the Front Post (#10) to the...

Page 10 - STEP 3; DIAGRAM 3

STEP 3 (See Diagram 3) A.) Attach the holes on the end of the two Backrest Supports (#8) to the pivot on the Main Seat Support (#6). Secure the two Backrest Supports to the pivot with one M12 x 6 1/8” Hex Bolt (#42), two Ø 1” Washers (#52), and one M12 Aircraft Nut (#56). Do not over tighten the Nut...

Page 11 - STEP 4; DIAGRAM 4

STEP 4 (See Diagram 4) A.) Attach two Ø ¾” Leg Developer Bushings (#27) to the Leg Developer (#11). Attach the Leg Developer to the Front Post (#10). Secure it with one M10 x 3 1/8” Allen Bolt (#46), two Ø ¾” Washers (#53), and one M10 Aircraft Nut (#57 ). Do not over tighten the Nut and Bolt. Make ...

Page 12 - DIAGRAM 5

STEP 5 (SEE DIAGRAM 5) A.) Attach the Arm Curl Pad (#23) to the Arm Curl Bracket (#19). Secure it with two M8 x 5/8” Allen Bolts (#50) and two Ø 5/8” Washers (#54). B.) Attach the Arm Curl Bracket to the bracket on the Arm Curl Stand (#9). Insert the M10 x 3 1’2” Allen Bolt (#45) through the open tr...

Page 15 - IMPEX INC; LIMITED WARRANTY

IMPEX INC . LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMP...

Impex MD-844 - Manual

Table of Contents:

Summary

Other Impex Models