Impex MD-PWR-20 - Manual - manualsarea.com

Page 2 - INC. For your safety and benefit, read this manual; Toll-Free Customer Service Number

TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 HARDWARE PACK……….....…..............................................................

Page 3 - IMPORTANT SAFETY NOTICE; Keep children and pets away from the machine at all times. DO NOT

IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precau...

Page 4 - WARNING LABEL REPLACEMENT

WARNING LABEL REPLACEMENT The warning labels shown here have been placed on the Rear Stabilizer, and Upper Frame. If the labels are missing or illegible, please call customer service at 1-800-888-8899 for replacements. Apply the labels in the location shown. 3

Page 5 - HARDWARE PACK

Page 7 - ASSEMBLY INSTRUCTION; Note: Do not tighten the Nuts and Bolts until instructed to do so.

ASSEMBLY INSTRUCTION Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Note: Do not tighten the Nuts and Bolts until instructed to ...

Page 8 - Securely tighten all Nuts and Bolts installed in Step-1 and Step-2.

STEP 2 (See Diagram 2) A.) Attach the Front Vertical Frame (#8) to the bracket on Rear Stabilizer (#7). Secure it with two M10 x 5/8” Allen Bolts (#80) and two Ø ¾” Washers (#84). B.) Attach Cross Brace (#2) to the Left & Right Support (#4 & #5). Secure each of the Cross Brace with two M10 x...

Page 10 - stopper of the Cable must be underneath the Frame.

STEP 4 (See Diagram 4) A.) Attach the 100” Upper Cable (#42) to the opening on the front of Upper Frame (#9). Attach a Pulley (#57) to the opening. Secure it with one M10 x 2 ½” Allen Bolt (#75), two Ø 1” x 5/8” Pulley Bushings (#62), and one M10 Aircraft Nut (#86). Note: The ball stopper of the Cab...

Page 11 - DIAGRAM 4

Page 12 - DIAGRAM 5

STEP 5 (See Diagram 5) A.) Do not tighten the Nuts and Bolts until instructed to do so. B.) Attach the Main Seat Support (#18) onto the Front Post (#22). Attach the Seat Bracket (#24) onto the Main Seat Support. Align the holes. Secure the Seat Bracket, Main Seat Support, and Front Post together wit...

Page 13 - DIAGRAM 6

STEP 6 (See Diagram 6) A.) Do not tighten Nuts and Bolts until instructed to do so. B.) Align the bracket on the Backrest Adjustment Support (#32) in between the two Backrest Supports (#35). Secure it with four M8 x 1 5/8” Allen Bolts (#81), eight Ø 5/8” Washers (#85), and four M8 Aircraft Nuts (#87...

Page 14 - DIAGRAM 7

STEP 7 (See Diagram 7) A.) Attach the Leg Developer (#25) to the open bracket on the Main Seat Support (#18). Secure it with one M10 x 3 ½” Allen Bolt (#73), two Ø ¾” Washers (#84), and one M10 Aircraft Nut (#86). Note: Do not over tighten the Nut and Bolt. Make sure the Leg Developer is able to mov...

Page 15 - DIAGRAM 8

STEP 8 (See Diagram 8) A.) Attach the Arm Curl Pad (#31) to the Arm Curl Stand (#28). Secure it with two M8 x 5/8” Allen Bolts (#82) and two Ø 5/8” Washers (#85). B.) Insert the Arm Curl Stand into the opening on the Main Seat Support (#18). Use the Lock Knob (#63) to lock the Stand at desired heigh...

Page 18 - PARTS LIST; DESCRIPTION

PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Floor Stabilizer 2 51 Ø 1” End Cap 6 2 Cross Brace 1 52 Ø ¾” End Cap 8 3 Upright Beam 2 53 2” Sleeve 3 4 Left Support 1 54 Ø 1 ¾” Rubber Bumper 1 5 Right Support 1 55 Foam Roll End Cap 4 6 Rear Vertical Frame 1 56 2 ¾” Floor Stabilizer End Cap 4 7 Rear Stabilize...

Page 19 - LIMITED WARRANTY

IMPEX ® INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX ® ") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IM...

Impex MD-PWR-20 - Manual

Table of Contents:

Summary

Other Impex Models